Discuss Replacement for a mira excel shower valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
Anyone got a good recommendations as a straight swop at a good price. For a new cartridge and Oring set it's £190. So if I can get a valve for this price which has 150mm centre compression connections would be better. Cheers fellers
 
from my local independent merchant last year, purple insert
 
I think you'll struggle to get it for £90. Merchant cost is over £100 + VAT.

However, shop round the internet, and you will probably get about £130 inc VAT but maybe a few quid delivery.

Still worth it though. If you gave me the choice between a second hand 10 year old Mira Excel, and any brand new shower on the market today for less than £150, I'd take the excel.
 
was a year ago and sorry plus vat, just assumed that every one would add the vat, merchants always assume that when they quote :)
 
I think you'll struggle to get it for £90. Merchant cost is over £100 + VAT.

However, shop round the internet, and you will probably get about £130 inc VAT but maybe a few quid delivery.

Still worth it though. If you gave me the choice between a second hand 10 year old Mira Excel, and any brand new shower on the market today for less than £150, I'd take the excel.
How do you rate the Aqualisa 609 then ?
Again the price for them seems to vary by a huge amount ?
 
How do you rate the Aqualisa 609 then ?
Again the price for them seems to vary by a huge amount ?

We haven't stocked Aqualisa for about 20 years, so my experience of them is a bit dated. When I saw the change from the brass bodied Mira 723 (or its fore-runner the Leonard 722) my feeling was that they had cheapened it, and the that the Excel would never last. However, I reckon it probably the most durable and reliable valve that we have ever sold. Not cheap mind.
 
I think you'll struggle to get it for £90. Merchant cost is over £100 + VAT.

However, shop round the internet, and you will probably get about £130 inc VAT but maybe a few quid delivery.

Still worth it though. If you gave me the choice between a second hand 10 year old Mira Excel, and any brand new shower on the market today for less than £150, I'd take the excel.


Me too, The excel is a great valve, they also work brilliantly on gravity systems. The 609's seem to go though cartridges too much for my liking.
 
Don't get rid of the excel, bite the bullet and change the cartridge. Brilliant showers compared to some of the stuff you get now.
 
mira excel everytime for me works and doesnt fall apart in 2 years mine in doors is 15 years old and works great
 
Status
Not open for further replies.

Reply to Replacement for a mira excel shower valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
247
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
386
Hi All, Looking for some advice on my little bathroom project. I took the bath out. I got a shower jacuzzi thing. The base has 2 wheels in the...
Replies
2
Views
191
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
277
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
324
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock