Discuss Should I be worried? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
10
Hi all,

Appreciate any advice, I have an issue of some sort of grainy blue material clogging up the hot water lines. Because I have mixer taps everywhere, that means all of my taps eventually get clogged and I have to remove and clean them.

I know its isolated to hot water because only the hot water side of the shower mixer bars gets clogged.

My system is comprised of (sorry, I'm a complete amateur so I may be laying this out wrong) a Worcester Greenstar Ri boiler, with a Magnaclean Micro attached (not sure if relevant). Upstairs is a (around 10 years old) Megaflo unvented hot water cylinder. Until recently, the boiler was not supplying hot water to the tank, which I had repaired in around March. Prior to that, the tank was being heated by the electric element for about a year (I didn't know it was broken to be honest, this is all new stuff to me, so that's why it was broken for a year :( ). Adding that in case the fact that pipes may have been lying dormant for months may make any difference.

I really appreciate any advice. I'll get someone in if I need to, just don't want to waste anyone's time.

I've attached a few photos. No idea what this stuff is.

IMG-20181013-WA0038.jpg


IMG-20181014-WA0002.jpg
 
First things first. What type of hot water system do you have? Do you have tanks in the loft? Are they open?

So, from what I can see:

1. Worcester Greenstar Ri (installed around 2016)

which heats the radiators and also feeds

2. Heatrae Sadia Megaflo Unvented Indirect Cylinder (installed around 2008)

3. Peripheral stuff like a Magnaclean Micro attached direct to the boiler, which I assume is for the radiators. Also the pressure expansion tank attached in the airing cupboard to the Megaflo.
 
So, from what I can see:

1. Worcester Greenstar Ri (installed around 2016)

which heats the radiators and also feeds

2. Heatrae Sadia Megaflo Unvented Indirect Cylinder (installed around 2008)

3. Peripheral stuff like a Magnaclean Micro attached direct to the boiler, which I assume is for the radiators. Also the pressure expansion tank attached in the airing cupboard to the Megaflo.

Sorry, forgot to add - no additional tanks. That's everything, according to my knowledge. We don't have a loft so I'm 90% sure there isn't anything hidden. The stuff reminds me of a water softener salt so I've hunted for one of those with no luck.
 
Do you live in a hard water area could be limescale
 
I live in Kent, so yes. Does limescale often appear like this?

Yea builds over time the blue bit I bet there's a blue flow restrictor behind the scale

I would test the hardness of your water to see if you need a softener
 

Reply to Should I be worried? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
223
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
223
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
462
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
398
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
285
PSxxxxxx
P
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock