Worcester camray utility 25/32 system - oil.....

[Aqua Tech]

Ok been having a nightmare with this old system, as i posted a week or so ago. Getting there with it slowly, but the boiler has now started to play up.

on start up everything kicks in as it should do (or so it seems). fan runs, and oil is getting through. Gave it a good service anyway, as could see it had never been done in the five years its been in. But it seems to just pulse when it shouls actually fire up, and keeps doing it. Just when u get frustrated with it it kicks in. Lasts for a while, stops and starts pulsing again. Over the weekend now it has got worse and is not firing much atall.

Called worcester and spoke to the senior engineers, and they said "not a clue sorry, we cant help"!

Its got me 'baffled', am I missing something simple? or is this going to be another headache???

 

[dontknowitall]

What are the FGA readings?

 

[Aqua Tech]

What are the FGA readings?

Cant get it on long enough to get a result... Whatis your thinking ?

 

[dontknowitall]

I was wondering if the CO was really high.

Have you tried a new pump? They're a frequent cause of problems.

 

[kimbo]

When you say pulse does it fire, go through the sequence. It may be recycling its own exhaust gases, I presume it is a balanced flue, disconnect the air snorkel and see if it does it then, it could also be overaired. Then I would be looking at the solenoid but it depends what burner is on it.Try what I said first.

 

[Aqua Tech]

we have put a new pump on the heating circuit as it was knackered, if your talking oil pump, that seems fine. are you thinking that the flu could be

 

[dontknowitall]

What pressure have you got on the oil pump?

 

[Aqua Tech]

When you say pulse does it fire, go through the sequence. It may be recycling its own exhaust gases, I presume it is a balanced flue, disconnect the air snorkel and see if it does it then, it could also be overaired. Then I would be looking at the solenoid but it depends what burner is on it.Try what I said first.

yes is seems to go through everything as it should, and yes it is. Will try that... thanks

 

[MattWeth]

Broken shear pin in the oil pump?

 

[Aqua Tech]

What pressure have you got on the oil pump?

it was good, but dont remember the reading. Was checked though !!!