Discuss Vokera Linea 25HE - rooms never reaching desired temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

it's chewing thru gas though.
One common reason for ridiculously high (apparent) gas consumption is submitting readings in cubic ft to a supplier who thinks they're in cubic meters.) Can you take two measurements of your gas meter reading 24 hours apart, please? Also photograph the meter at the time of each reading and upload the photos.

Another useful check is to switch the heating off for a period of several hours in the early evening and make sure that the meter doesn't change during the period. This checks that you are reading the correct meter and it is supplying only your flat. Obviously, you need to do this at a time when other people are likely to be consuming gas; 24 hours is best, if you can stand the cold that long.
 
It's a pre-pay unfortunately, which was here before I moved in (no debt on it), so I can see how much money is being used (as opposed to having to read meter units).

I'm the only person here and the heating is generally completely off during the day when I'm at work (set to come at around 3pm at 18 ramping up to 21 at around 530pm then off again at 10pm).

So from 10pm until 3pm the following day the boiler is off).
 
It's a pre-pay unfortunately, which was here before I moved in (no debt on it), so I can see how much money is being used (as opposed to having to read meter units).

How much is it charging you (per cubic metre or ft) for the gas? How much does is it costing per day?

If you don't provide actual figures, we can't check that whether they are reasonable or not.
 
I'll need to see how to get the meter to tell me the chargeable rate. Pressing button A just shows current debt (£0), meter index, and current balance. Button B doesn't seem to show anything.

It's used over £5 in 36 hours (but it's not been on for all of those 36 hours).
 
I'll need to see how to get the meter to tell me the chargeable rate. Pressing button A just shows current debt (£0), meter index, and current balance. Button B doesn't seem to show anything.

It's used over £5 in 36 hours (but it's not been on for all of those 36 hours).

You need to find out from the gas supplier what tariff you are on. I suspect you're just being charged a lot per kW hr.
 

Reply to Vokera Linea 25HE - rooms never reaching desired temp in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
325
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
Replies
2
Views
246
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
192
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
283
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
221

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock