Search the forum,

Discuss Vaillant EcoTec Pro not reaching set temperature in the USA area at PlumbersForums.net

Messages
2
Hello! We have 3 years old Vaillant boiler and recently we noticed that it's not reaching set temperature. I set the temp to 50 deg C, and then when we open the water, it starts burning and burns about 4-5 sec. then it stops. around 46 deg C. Water cools down a bit, then it starts burning again. this time burns about 2-3 sec and stops. I don't think it's related to temperature but it tries to burn and something make it stop. There is no error code on the screen. I will attach a video of the problem as well. I'll be appreciated if you can give me an idea what is it about. Thank you!

video: video-1603189609 - https://streamable.com/mfr5v4
 
It could be one of a few different faults.
If its been registered and serviced and fitted to a clean system it should still be under warranty
 

Reply to Vaillant EcoTec Pro not reaching set temperature in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
337
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
250
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock