Search the forum,

Discuss UFH zones not heating up in the Plumbing Zone area at PlumbersForums.net

Messages
1
Hi, I'm a complete novice to UFH so excuse my ignorance! I've just had underfloor heating installed and an area of the ground floor is not heating up. The thermostat is set to 21 but it isn't getting past 20, and that's due to heat from other zones within a large open plan ground floor. The pins on the manifold seem to be stuck up on these zones compared to the others. The installer has had a look and says that the thermostat needs to be moved as the heat from the other zones is affecting it, but to my understanding surely if the thermostat is set to 21 and its only reading a room temperature of 20 the floor should be heating up?! Picture of the manifolds and the pins for the zones attached, the far left 2 are the areas that are not heating up. Any knowledge that anyone can impart would be much appreciated
 

Attachments

  • 20211203_202516.jpg
    20211203_202516.jpg
    573.7 KB · Views: 13
  • 20211203_202522.jpg
    20211203_202522.jpg
    414.7 KB · Views: 13

Reply to UFH zones not heating up in the Plumbing Zone area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
241
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
319
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock