Search the forum,

Thoughts on this flue

Discuss Thoughts on this flue in the Gas Engineers Forum area at PlumbersForums.net

G

Gary Gas

Messages
1
Installed 2 days ago, Worcester 4000. Haven’t seen anything like this before, any thoughts.
Personally I would have gone horizontal with an offset bend in the roof space ( to get minimum distance from boundary) and terminated at the gable end.
 

Attachments

  • E54622DD-FEB2-423A-8509-B2EB48A0D9D6.jpeg
    E54622DD-FEB2-423A-8509-B2EB48A0D9D6.jpeg
    535.8 KB · Views: 21
  • 4376661F-CF0F-45C3-9650-47E31E4BA8D3.jpeg
    4376661F-CF0F-45C3-9650-47E31E4BA8D3.jpeg
    897.7 KB · Views: 21
It’s fine but the joint needs to be sealed with silicone and there doesn’t look like a lead slate
 

Reply to Thoughts on this flue in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
312
Chuck
C
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
218
DIwhYdidIstartThis
D
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
279
oz-plumber
O
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
217
oz-plumber
O
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
258
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock