Discuss Thermostat hit and miss with boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
132
hi guys

I have had a new boiler installed, an ideal logic 30k system boiler, with Danfoss rf thermostat RET2000b-rf+rx1-s, wireless. I have had problems with boiler not turning on with thermostat and sometimes not switching off, the installer has now moved the receiver even closer and I am still having problems, the signal sign is showing on thermostat and so is the heat sign. The receiver ch button is on red like it should be but boiler does not come on, today nothing happened for ten minutes so i turned the thermostat to off twice and back up, then it worked.

Any suggestions what the issue might be?

Thanks
 
pixs attached is it helps

A0ED440C-BE80-42DA-8DF3-4C0EFCD03D0C.jpeg


C1A07554-0F61-4109-86DB-6F99B118F570.jpeg


9DD710A5-A01D-49C1-A965-26CC08C42EED.jpeg
 
I think you'll find this is something in the boiler as I had a similar issue with a vogue combi (Ideal) where it would turn on but not off. They attended under warranty as all equipment was from them and they ended changing something in the boiler although the customer doesn't know what
 
Hi JVTrades, its only not switched off once or twice but my main issue is it does not seem to come on when I set temperature especially first thing in morning when boiler has been switched off overnight.
 
The receiver was about 15 meters away, it should work upto 30 meters but there were a few walls in between and now that has been moved and the distance from receiver to thermostat is roughly 3-4 meters with one wall in between. The receiver lights up when i turn thermostat up, its the boiler that doesn’t turn on when it should do
 
Its hit and miss, sometimes it comes on within seconds and then likd this morning I waited 5 minutes and nothing happened, then I switched the thermostat down and up again then it came on instantly, it is intermittent. Got boiler installer and electrician coming on Wednesday to check boiler as well as thermostat /receiver.
 

Reply to Thermostat hit and miss with boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have moved to house that has an Ideal Logic combi c24 with a Danfoss RX1-S receiver and a RET2000B - RF thermostat. However, the mechanical...
Replies
1
Views
650
Deleted member 120897
D
I have a ideal logic 30 boiler ,the thermostat receiver looks to have died ( no lights on wired receiver ) I believe this need# replacing but in...
Replies
1
Views
836
Hi I'm having issues with my wireless Honeywell thermostat. It's sat in the living room, set at 18C currently. It makes my Worcester Greenstar...
Replies
36
Views
2K
Hi everyone, I’m writing on behalf of my elderly neighbour and hoping this is a problem someone on this forum has experience of and remedied...
Replies
1
Views
451
Hi, whenever my Gloworm 18r is on even if I leave it on non-stop for 6 hours the flame symbol for the burner never switches off and the radiator...
Replies
4
Views
378
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock