Search the forum,

secondary hot water circulating pump

Post new thread

Discuss secondary hot water circulating pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

westyvip

iv just installed a unvented cylinder and am fitting secondary return on hot water to provide hot water to taps as house is large with kitchen/bathroom at other side of house to cylinder (installed in garage). Just wondering what bronze pump people buy/use? im looking at a Grundfos UPS 15-50 Hot water circulator or a wilo sb30. Does anyone have any thoughts or suggestions as tbh its the first cylinder iv fitted requiring secondary return!
 
Itll have to ba a stainless or a bronze pump. They all are as good as each other depends on the price. Dont forget the check valve.
 
Have a look at the grundfos 15-14 range designed for a 15mm return, available with a timer or stat built in
 
Status
Not open for further replies.

Reply to secondary hot water circulating pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

H
Requirement Circulation pump for the hot water secondary Return
Silly question (and might already been asked 100rds of time) - I am specifying a circulation pump for the hot water secondary (circulation) return to reduce the wait for hot water. HW is coming from unvented cylinder with a secondary return connection. The secondary return is almost straight...
Replies
12
Views
1K
ShaunCorbs
ShaunCorbs
C
hot water circulator pump vibration
Hi everyone, My flat is located next to a communal boiler with a hot water circulator pump ( Grundfos UPS 15-50N Secondary Hot Water Circulator ). The pump is noisy and vibrating. Would installing a more powerful pump solve the problem? Many thanks for your help!
Replies
2
Views
393
ChristineLondon
C
T
h/w cylinder compatible with future heat pump system?
Hi We urgently need to get our h/w cylinder replaced because it's leaking. Our current system is oil boiler feeding underfloor downstairs, radiators upstairs and an unvented hot water cylinder for hot water. We are thinking of moving to a heat pump at some point but aren't ready to do this. My...
Replies
2
Views
363
Timmy D
T
G
New UPS3 pump too powerful ?
Hi, I have just had my central heating system "upgraded" for a four bed-roomed detached house. The heating company recommended going from the open vented system to sealed / pressurized system, new pump ( UPS3 Grundfos ) all new plastic pipework ( extending ) the 22mm feed and return pipes so no...
Replies
9
Views
1K
Zippymark
Z
D
Circulation pump with electrical speed switching for wood boiler stove
Can anyone help, please? I'm looking for a heating system circulation pump for a domestic install, with 3 speeds, where the speed can be toggled electrically as well as via a push switch on the pump body. I'm using this pump with a wood boiler stove, where I want to run the pump at its slowest...
Replies
6
Views
969
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock