Search the forum,

Discuss Rothenberg sperfire 2 not igniting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Eyespy999

Plumbers Arms member
Plumber
Messages
148
Evening,

My superfire has stopped igniting, It has been intermittent and now wont spark, is there a quick fix or is it a replacement job? Its only 15 months old. I could use a match to light it!
 
If you ring up Rothenberger they will send you virtually a new kit
 
Pull the nozzle off and give everything a good clean. Had mine about 10 years and does tend to get cacked up with flux etc and a good fettle works wonders
 
Contacted rothenberger they have sorted it for me, I am glad I bought a decent torch as you get decent post sales support!
 
On one of mine I found that the spark gap in the nozzle had closed up for some reason so it was too close to the wall of the tube to make a decent spark. I took the nozzle off, moved the wire out a little, got a good spark, cleaned everything and reassembled.
 
Status
Not open for further replies.

Reply to Rothenberg sperfire 2 not igniting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
242
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
119
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
439
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
230
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock