Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Replacing an installed megaflow system with a combi-boiler when current boiler needs replacing in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
1
Home owner looking for some advice pls. We have a megaflow system which we are considering removing as the tank takes up a lot of space and we don’t find we are using more than one shower or bath at a time.

Our plan is to do this when the current boiler needs replacing (probably in the next 12-18 months). My question is whether we can separate out the task of removing the megaflow tank et cetera from that of replacing the boiler.

Ideally we would just replace the boiler with a combi at a time to suit us and then remove the megaflow kit at some convenient point in the future. But is this approach actually feasible or does everything have to be done at the same time

Thank you for any insight.
 
How many bathrooms and any electric showers ?
 
A combi can be installed to run a megaflo without using the hot water side of the boiler.
So yes it could be done in two stages.
But really, why do it this way? It will be cheaper to get it all done at once.
 

Reply to Replacing an installed megaflow system with a combi-boiler when current boiler needs replacing in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
550
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock