Search the forum,

Discuss Regulating a manual & automatic air vent valve from Emmeti in the USA area at PlumbersForums.net

Messages
2
I'm using a manual & automatic air vent valve from Emmeti. It has 2 caps, a gray one that suppose to be automatic and a black one (on the top) that is manual.

I could understand if I suppose to let the grey cap (auto) closed all the time. Does one know how it works?

Thanks.
 

Attachments

  • 67674396_2GG.jpg
    67674396_2GG.jpg
    20.1 KB · Views: 12
I appreciate this is an old post, but I've just found a soaked carpet underneath the bathroom UFH manifold because one of these so called automatic air vents is leaking and probably has been since the heating came back on a couple of weeks ago!
What a piece of junk - failed after only a couple of years!
 

Reply to Regulating a manual & automatic air vent valve from Emmeti in the USA area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
318
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
437
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
241
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
192
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock