Discuss Logic heat only in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

Flue man

Are the logic heat only boilers any good , usually fit the baxi solo , also which are the best rf controls to use on a heat only boiler??
Thanks
 
Oh if you've been installing solo you will love the logics. Needs a pump live connection tho!

I am also infatuated with wb cdi regular.
 
They're a bit big I find. Taller than a normal heat only. Sometimes won't fit where a solo has been.

Next time I'll be trying a Viessman - no pump overrun.
 
Next time I'll be trying a Viessman - no pump overrun.

Don't do it! They don't like it. I know the reps say it's ok but in reality they are a nuisance I tried one and ended up dragging a cable back to the boiler.

Intergas don't need a pump overrun and seem ok I guess due to mass of heat exchanger
 
Tom the viessman don't need a pump overrun but because they fire pretty aggressively then if they cycle for any reason they bake the sludge to the heat exchanger.

trust me, i had to take a dozen off the wall and flush out!!!
 
Vissesman are heaps of crap! It's a mix up between a Vokera and an ariston. TO be totally frank the vodens is an absolute heap. I would rather maintain 200 ravenheat a that two of those!

The cdi regular can come off bottom or it has a pre set up pipe work and built in standoff for top exit gas can come from top too.

Just when it's full u need to wait 30mins while it's on low burn. You can override but pita!
 
Last edited by a moderator:
The logic heat only is a brilliant boiler, so easy to fit and comes with an easy to fit rear flue option!

Just like all the ideal range at the moment absolute brilliant.
 
Dont forget to order the Logic +, not the Logic.

Small difference in name, five years difference in warranty.
 
mcniven just randomly i called them today about one i have just priced boilermate 2000 does not need a pump over run so just the Lne and swlive
 
The logic and logic + are the same boiler the only difference is

* Warranty
* Cover
* Display

The price diff is around £150 for us, so its always worth it for the extra 5 years warranty at present (will go back to a 5 year warranty from 7 I think end of April)
 
tho the plus looks like a logic with the display,

currently independent + is my budget boiler logic plus is mid range top is vogue unless customers want the worcester thats all i have been fitting bar the proman and solos on green deal stuff
 
mcniven just randomly i called them today about one i have just priced boilermate 2000 does not need a pump over run so just the Lne and swlive

When engineer visits on a callout wave goodbye to warranty!
 
Post deleted - I was confusing Baxi and Ideal.

I blame a very acceptable Chilean Cab Sav, served with hovis digestives and some "fruity and aromatic" Waitrose cheddar.
 
Last edited by a moderator:
i got ideal to send it to me in writing, i had to speak to one of there managers as 3 people could not give me a straight answer

It was a gledhill gb30 with boilermate2000 replacing the gledhill and putting an logic plus in work with the boilermate
 
Just put the 3 core flex into terminals then block and tape it hide behind the gyproc ...

Joke
 
Boiler mate wouldn't have any benefit from pump overrun as it's a store so once satisfied boiler would just pump 85c water back through hex, wouldn't cool it much? Had a system mate causing boiler to lock out on f6 I think / flow issue ?
 
I have an Ideal Logic Heat 18kw left over from a contract for sale if anyone wants it. Unopened. £350.00?.....
 
Status
Not open for further replies.

Reply to Logic heat only in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
248
Hi All, Looking for a recommendation for a heat only boiler to replace my 30yrs old ideal boiler. Any makes you would recommend and any to avoid...
Replies
5
Views
526
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
304
Hello, I am looking for a heating engineer to diagnose and resolve an issue with my Vaillant EcoTec 832 combi boiler. Job Location: Copeland Rd...
Replies
1
Views
430
I just had a quote for a new boiler install as follows I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well I...
Replies
3
Views
592
Back
Top