Search the forum,

Discuss Just for fun. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

tommy1712

How do u personally drain and remove a rad with out makeing any mess on the customers lovely white carpet.

I I got a lovely modified flexi bucket
 
Roll and stroll, dustsheets, and my mrs best towels from the airing cupboard.
 
Rubble sack and towels every time! Once the rad is drained and off the wall, hose on either valve and drain off.
 
Depends on the customer if you know they are a nightmare then it is down to them to get the carpet fitters out to remove carpet from area being worked on or no play !
 
Have ha seen them floor protection matts I think tool station do them, got a slit for the pipe. It's catching the water that's the fun bit, even more on a sealed system hahahaha.
 
Two layers of decent plastic on the floor and rolled onto the wall with some rugs on top. The same is under wet hoover. It’s better be safe than sorry.
 
Polythene backed dust sheet and towel under rad valves. once rad is drained, if there is play on the pipe I pull it away slightly and put a compression cap on the valve tail. Sometimes the lockshield valve tail is bigger so i cap the other end and always keep the lockshield end higher when carrying.
 
Dust sheets are fine until you lift rad and black sludge sprays on carpet 5 miles away from where your working, you know the only place you haven't put a dust sheet or black stuff goes through the sheet,

wet vac is good for smaller rads as long as they are small!!

Usually drain whole system for me if cream carpets, if wooden flooring or vinyl then dust sheets and wet vac!!
 
Plastic bags and towels. Try to roll back carpet it ye can. Usually put old pair of valves on rad being removed when carrying it out just incase ye get a splash of the black stuff from rad age carrying it out. Ah and make sure the valves ye attach are closed
 
Make sure the customer isn't looking, hold breath, snatch valves and cover with fingers, open door with boot and fall outside before anyone sees, empty contents over prize flowers and demand payment as soon as the van engine is running!
 
A clause on your paper work stating any cream or white carpets not removed you wont be liable for although you'll do your best to protect it
 
Pull the carpet back a bit and shove an old towel behind it to hold it. Loosen nuts hold ends with your thumbs and carry it out full.
I refuse to use a hoover on a pipe. Its just not natural :lol:
 
Depends what sort of customers and their carpets I guess ?
Same with floors down to the chippy or joiner when working in decent houses .
As my old plumber always said I do pipes pal that block of wood you want as a ground for the rad do I look like I do wood ?
 
I thought removing and re-laying carpets was just a daily part of our job lol,,,,, even got my faithfull knee kicker lol
 
I thought removing and re-laying carpets was just a daily part of our job lol,,,,, even got my faithfull knee kicker lol

Ill lift a carpet and lay it down and get my bolster or wood chisel to push it down against the skirt to make it look neat, but I don't think I've ever got the kicker out
 
dust sheets, use wet vac to empty rad, and off you go, dont trip with a full wet vac, ruins the carpet
 
I thought removing and re-laying carpets was just a daily part of our job lol,,,,, even got my faithfull knee kicker lol

Ive even got a staple hammer for pinning the underlay back in place
 
How the hell do I get my messages . Every time I get an email I click on it but cant see my messages
 
Many years ago a lad I did my apprenticeship with thought he had a great idea when removing a bedroom radiator.

He opened the window and emptied the remaining water/sludge out if the rad by resting it in the opening and tipping it out !!

Unfortunately the house was pebbledashed and painted white, did make a fecking mess down the front of the house.

Needless to say Bgas paid to have the front of the house repainted.
 
How the hell do I get my messages . Every time I get an email I click on it but cant see my messages

Build your posts count up. Posting more and contributing to the forums unlocks features and privileges.
 
Status
Not open for further replies.

Reply to Just for fun. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
170
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
184
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
103
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
193
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
122
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock