Discuss installing drinking water fountain, double check valve? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Couple of options basin height or 1m or what ever height there happy with
 
Thank you so basin height 820 or higher around 1meter. So people don't have to bend down as much to drink from I guess
 
Yes spot on
 
Thanks I'll likely go at around 1meter

Be careful about guessing this one. You need to consider the need to make such facilities 'Accessible' to wheelchair users, etc. these days. I don't know all the rules I'm afraid but better to check before you install.
 
Be careful about guessing this one. You need to consider the need to make such facilities 'Accessible' to wheelchair users, etc. these days. I don't know all the rules I'm afraid but better to check before you install.

Normally fit a second at kid height too low of adults to use
 
Thanks maybe a daft question what kind of angle do you position the tap at to the the spray right same as the picture I'm guessing
 
Just looked on the webpage for a similar fountain there recommending 915mm to front lip for adult height
 
Just looked on the webpage for a similar fountain there recommending 915mm to front lip for adult height

its about right
 
CAESAR32 ??????
 
Status
Not open for further replies.

Reply to installing drinking water fountain, double check valve? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
259
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
341
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
235
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
321
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
285
PSxxxxxx
P
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock