Search the forum,

Discuss Identify Make of Bath Tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
1
Desperate. Can anyone help me identify this bath mixer tap?
025AA31F-BAC9-4700-A028-450D4031C408.jpeg
16C836F7-D4F6-4B3A-AE53-398761EED32C.jpeg
Make worn off and needs replacement cartridge. External diameter is 46mm and height is 114mm
 
Should just be a 3/4 1/4 turn cartridge
 
I think that bath filler was a popular model, probably made in China, and retailed by many outlets, for example:
Whether the same cartridge fits them all I don't know, but probably!!







So could be:
As Shaun said!
C9D1B6E9-894F-4DD4-A957-7488B7C6E005.png
 
Last edited:

Reply to Identify Make of Bath Tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
239
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
73
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
132
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock