Search the forum,

Discuss Icos HE5 and Drayton ZA5 problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Sunburstb0y

Hello

Have been battling with this issue for a while now.

Icos HE15 starting firing up by itself every 6 to 7 minutes for about 20 seconds then would switch off. The only way to stop this was to actually switch the boiler off.

Boiler would always switch on normally for central heating in the evenings.

After much research most likely problem seemed to be a stuck micro-switch in the Drayton ZA5 actuator (2 port) so I have just fitted a new one.

The valve is not stuck and can be turned by hand.

Now, the boiler won't fire up. I switch on and the boiler code goes from 0 to 2 and back to 0 and then just stays there.

Anyone any ideas please, this is driving me nuts!

Thanks

Neil
 
Status
Not open for further replies.

Reply to Icos HE5 and Drayton ZA5 problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
190
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
418
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock