Discuss Business cards in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

Kyle87

Where's the best place to get them. Online or find somewhere local. And how much do you normally spend.

Thanks much in advance
 
Just google it, you can get them for next to nothing, but then they just look like everybody else's. Hope this helps
 
Is that a good price then bod. I havnt yet looked into it so I really wouldn't know.

And what about the design. How do you normally go about creating the design?
 
Go on vistaprint. It's cheap as chips. I don't use business cards as I contract all my work, but on one contract I worked on they needed a business card and letterhead. I got 500 cards for about 4 quid. They look decent enough, just pay the extra couple of quid for the glossy finish. Job done :)
 
ink shop printing

Best quality printing in the UK and well priced.

If you want to do your own design quickly and easily download a free copy of Serif Pagcplus and use one of the templates. Webplus for designing your own website is free too.
Free Software from Serif
 
Last edited by a moderator:
Thanks chaps. Very useful info here. Will need a website sorting out soon also so thanks system!!
 
I have a brilliant piece of advice for you, especially if you use Vistaprint. Once you have made a final check on your design and you are happy with the spelling, they will ask you to tick a box to declare that you are sure the design is correct and that it will be printed exactly as it is. After doing so, if you decide you want to change something, make sure you re-check everything AGAIN, as I didn't and it took me back to the part of the design in which I'd made a spelling mistake and I stupidly clicked the declaration, with a spelling mistake and had 1000 business cards delivered that are now useless!!!

Spot the mistake......(it's not the blanked out bit for any smart arses!)
Business Card.jpg
 
Status
Not open for further replies.

Reply to Business cards in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
220
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
272
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
257
Hi All, Looking for some advice on my little bathroom project. I took the bath out. I got a shower jacuzzi thing. The base has 2 wheels in the...
Replies
2
Views
175
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock