Biasi Riva he mk2 faulty

[Old Account]

hi everyone,

Does anyone know why the boiler ignites in heating mode and goes every few seconds off again until goes into a lockout?

Hot water works fine.

I am not familiar with those boilers would appreciate a little help. I just changed a hob there and purged the system 1h later the boiler doesn’t work in heating mode just ignites shortly and goes off again.

Any idea what it could be?
No ch filter installed nothing really poor installation.

Kind regards
Ron

 

[AMGasServices]

Try changing the ch sensor.

If your burner pressures are ok. And make sure it’s switching over to ch mode.

 

[Old Account]

Try changing the ch sensor.

If your burner pressures are ok. And make sure it’s switching over to ch mode.

I recently changed a new cartridge and actuator head. It’s just funny as hot water works fine though only in heating mode it goes on for about 2 seconds and goes off again.

I shall check today the burner pressure and ch sensor thank you AMG!!!!

 

[AMGasServices]

Does the pump flow switch operate?

 

[Old Account]

Does the pump flow switch operate?

Yes

 

[Old Account]

Does the pump flow switch operate?

I just came home and the gas valve was not set properly. I adjusted the gas valve and now everything is spot on

 

[AMGasServices]

I just came home and the gas valve was not set properly. I adjusted the gas valve and now everything is spot on

Ok cool main thing it’s all sorted.

 

[Old Account]

Ok cool main thing it’s all sorted.

Cheers mate for you quick input in helping me.