Discuss Bathroom radiators stopped working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Y1D

Messages
8
Hi there

I’ve had to have a new heat exchanger and air valve installed into my boiler which is now working well. The only problem is since then neither of my 2 bathroom radiators come on. They both always used to come on when the hot water was on, as well as when the heating was on which was nice to have nice warm rooms in the morning.

I’ve tried to bleed both but water comes out straight away so it’s not air, and all the other radiators work fine.

Any ideas what the issue could be and can I resolve it or will I need the plumber back again?

Thanks.
 
do they warm up with the heating on?
 
Hi, thanks for the reply - no, they’re permanently cold.

did they used to come on with the rest of the heating?
 
did they used to come on with the rest of the heating?
Yep, they used to come on when only the hot water was on, as well as when the central heating was on. It was useful as it warmed the room as well as dried the towels. Now they don’t work at all.
 
could be air locked

turn the heating on

and if you have trvs on all / most of the other rads turn them off

should sort you out and once the rails become warm turn all the other rads back to normal / what they were set at

and then bleed the towel rails
 
could be air locked

turn the heating on

and if you have trvs on all / most of the other rads turn them off

should sort you out and once the rails become warm turn all the other rads back to normal / what they were set at

and then bleed the towel rails
Thanks will try that in morning as the lad has just gone to bed. Will report back - thanks
 
Still no joy. The plumber did say there was air in the system and it had no where to go.... Guess it went into the bathroom radiator pipes.

The feed pipes aren't even getting warm so I guess ill have to get someone else out to take a look.
 
Hot water wasn't on when you tried my fix was it ?
 
Hot water wasn't on when you tried my fix was it ?
No. The pipes into the radiators aren’t even getting warm. I’ve removed some aif from another radiator and checked all, but as soon as I loosen the nut water comes out and no air.
 
Status
Not open for further replies.

Reply to Bathroom radiators stopped working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Oil boiler (now~15 years old) unvented system with 17 radiators. We moved in 5 years ago and I had to keep bleeding the same radiator. The bleed...
Replies
1
Views
263
Hi All, In Dec 2023 I had my annual boiler service and asked the plumber to change 2 radiator valves as the radiator in the toilet downstairs was...
Replies
7
Views
527
My towel rail is not electric but separate to central heating and has been working consistently but since the 2 port valve was replaced on Monday...
Replies
3
Views
250
Hi so I changed a towel radiator in bathroom from a normal radiator. I bunged the f&e tank and vent pipe , drained about a pint of water out the...
Replies
3
Views
614
Hi, Sorry if question already answered in previous posts, but I can't find a solution to the below: We recently moved house to a new home that...
Replies
7
Views
532
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock