Search the forum,

Discuss alpha he25 whistling and juddering in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Steve.H

Gas Engineer
Messages
22
Hi all, any advice would be greatly appreciated.
Customer has an Alpha he25, boiler fires and after about 2 minutes it starts whistling/humming and the noise increases, it happens when calling for heating or hot water, when the boiler shuts down it also judders for a second or 2, they sent me a video playing the sound but not sure how to put that up on here.
The system has been powerflushed recently!
Just wondering if any one has any ideas?
Going to call later today/tonight
Many thanks.
 
I didn’t managed to get there Friday, been thinking about it all weekend, was thinking it might be the pump but and will check it tomorrow night,(can’t go in the days due to them working during the days),
Does anyone know how to put a video up?
 
It doesn’t sound like an over heating or Kettling noise, will post more about it after I’ve been there tomorrow night.
 
Could it be pump related? Maintain quiet a few of this type of boiler were I work.
Went there tonight and it was the pump, took the pump off and could feel the pump wasn’t spinning freely, felt like grit in it catching when it spun, cleaned it out put it back and all nice and quiet with no juddering when boiler turns off!
The sound it was making was really loud more of a humming noise but didn’t seem to come from the pump, think it was resonating through the pipework in the boiler,
Thanks for all advice given, much appreciated.
 
Did you risk the isolation valve under the boiler or drain the system to take the pump out? I have found the isolation valves on alphas terrible, leak alot when turned off.
 
Did you risk the isolation valve under the boiler or drain the system to take the pump out? I have found the isolation valves on alphas terrible, leak alot when turned off.
I drained down from under the boiler, bit of a fiddle to get at, filled back up and all ok! Didn’t realise there was an issue with them, might think twice next time.
 
Status
Not open for further replies.

Reply to alpha he25 whistling and juddering in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
294
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
256
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
481
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock