You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
won't
The English modal verbs are a subset of the English auxiliary verbs used mostly to express modality (properties such as possibility, obligation, etc.). They can be distinguished from other verbs by their defectiveness (they do not have participle or infinitive forms) and by their neutralization (that they do not take the ending -(e)s in the third-person singular).
The principal English modal verbs are can, could, may, might, shall, should, will, would, and must. Certain other verbs are sometimes, but not always, classed as modals; these include ought, had better, and (in certain uses) dare and need. Verbs which share only some of the characteristics of the principal modals are sometimes called "quasi-modals", "semi-modals", or "pseudo-modals".
Hi guys in new here.I've just bought my first home and I've got the point of fitting the washing machine.I can't open the tap once the inlet pipe is fastened in place.I tried opening it after turning the water off then fitting the pipe but then I can't fasten the pipe on enough to get it to seal...
toboy
Thread
inlet
machine
pipe
tap
washing
washing machine
won't
Hi there,
Recently moved and noticed the pressure gauge was very low on the boiler so I filled to recommended 1-1.5 bar. Only now to see drips of water coming from the Magnaclean.
Turned water off n bled bathroom radiator until drip stopped then unscrewed the unit. Both washers we damaged...
Lisa G
Thread
connectors
cross
cylinder
help
leaking
magnaclean
threaded
tighten
won't
Hello all. I've a Biasi 24s. I came home from work the other day to find the ch on. The boiler is in summer mode and the only way to turn it off is by setting the winter/summer switch to zero. I've replaced both dhw thermostats and the main flow switch is ok. Could it be the ignition device?
Evenings Lads
Just want your thoughts on my plan. Im currently doing my house up and have 1/2'' lead main coming in. Eventually i want to renew back to the street in alkathene. For now though I'm planning on cutting the lead where it comes under the floor and connecting onto alkathene and...
Plumber has put a soakaway 30"from my house,and has put the pipe directly on to heavy clay,surely this cannot be acceptable.Their isn't any gravel,sand or anything to help the water disperse into the ground,any advice would be greatly appreciated.
When this hot water lever tap is turned on it takes a lot of wiggling and twisting to get it to turn off. It's about 15 years old and it'd probably be better to change the whole thing but out of interest, what do you think it is that's causing it? Just a washer or something like that?
I've had a google around and don't seem to be able to find the solution for this toilet that won't stop running. It's bad timing too as I just had a meter installed! I'm really hoping someone here might be able to assist me as I can't really afford a call-out and a subsequent markup on any...
Our heating has only been on twice so far since ive moved in, as far as Im aware.
Both the heating and hot water lights are on, we have hot water but the burner is not lighting, so no heating. We managed to get it to come on by simply turning up the thermostat but it hasnt come on since...
I have been talking with the owner of UKPF and I can confirm that the above company are in administration. As such they will be removed as a forum sponsor within the next week.
Please be aware that their Official Receivers won't be contacting people that they owe no money to.
If you or someone...
Anyone fitted one of these?
From the technical description it seems to be a Ground Source Heat Pump spoofing as an ASHP by using an air collector running glycol instead of the ground loop.
Client had one installed about 3-4 years ago and it's never worked properly, original installer from...
Hello all,
I'm just after a bit of advice... I have an intermittent problem with my 4 year old Worcester Greenstar 15Ri boiler. Sometimes, even when the thermostat is up to temperature, and the time controller clicks off, the boiler will carry on firing. When this happens, the water cylinder...
Hi lads
fitted a 18 RI today......
fired the boiler on hot water worked fine, then i tried heating on its own and didnt fire
system had a new honeywell 3 port with drayton programmer
spent an hour testing 3 port/wireing etc then my boss said this is an old way of wiring a system and it...
I turned my power shower off, but it kept running until the header tank was empty. I thought it was a problem with the shower unit itself, so I removed it, but water still flowing from the hot and cold pipes. Is this a pump or valve problem somewhere?
Any help would be appreciated. Thanks
panamajack
Thread
after
power
power shower
removed
shower
turn off
water
won't
Hi all, look for some advice. My toilet won't stop running. Not all the time , but it's a pain in the you know where. It's a concealed unit made by macdee. The short flush button on the dual flush button is and has been slack with nothing behind it when you press it for a while. Not sure if this...
I've installed a new Worcester 30 CDI Regular this week, Replacing an old glow worm energy saver 80, everything going well up until the cold fill, that's when things took a turn for the proverbial.
Cutting a very long story short, what looks like a very neat S plan in the cylinder cupboard, is...
Infusion Andy
Thread
fitted
one pipe
pipe
quite
speed
system
things
won't
Hi guys, hope someone here can help. Here goes with the full story -
This is at a relative's house and she's a bit hazy on some details - Her rads were at best luke warm to cold and could only get enough hot water to dampen the bath.
She called a heating engineer, who wanted to powerflush for...
Hi,
hoping someone can help out here. I have just had a single storey extension built size 5x4m and we've had one rad installed. The radiator only gets slightly warm on the left hand side. I've had the plumber back round and he suggested turning all the other rads off to get the flow forced...
0redrum0
Thread
about
boiler
extension
garage
hot
radiator
return
these
won't
Hi, I frequently set an elderly neighbour's LP522 Drayton Lifestyle programmer for him,normally without drama.This evening it would appear that his central heating pump won't run until the hot water is advanced or selected to off. The hot water can then be advanced or selected to on and works...
Is their an interest in these and do plumbers want them. They are top quality and expensive but are people willing to buy them. Reason I'm asking is I have a chance to pick up 36 wrenches from an auction and wanted to know if I would be able to get rid of the many I won't need??
Good evening to you all. I have a Grant Multipass central heating boiler with a Honeywell control panel, both about 15 years old.. It runs fine if I switch the hot water on, and the boiler comes on if it gets cold, vie the froststat in the roof I guess, but I can't get it to run the heating. I...
jonnylandagent
Thread
boiler
central heating system
hot
hot water
oil
oil boiler
programme
start
water
won't
working
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.