Search the forum,

supplies

Pet Supplies Plus (also styled Pet Supplies "Plus"), founded in 1988 in Redford, Michigan in the United States, is a privately held pet supply retailing corporation with a major presence in the US. As of 2005, it was the third largest specialty pet food retailer in the US. The company began adding franchise locations in the Midwest, expanding into the northeastern and southern states during the late 1990s. As of February 2021, Pet Supplies Plus store locations consisted of over 560 stores in 36 states.

View More On Wikipedia.org
Recent contents Top users
  1. A

    Bath taps for unbalanced supplies

    Hi there. New diy member here. I am refreshing my bathroom and the taps are currently fed cold mains and gravity hot from the loft. There only seems to be a very small cold water tank in the loft. I am looking at putting a bath filler mixer tap on the bath but concerned about the unbalanced...
  2. J

    what shower exposed valve accepts surface mounted supplies dropped from ceiling, Cant find any on normal websites.

    shower valve that takes exposed supplies from ceiling
    • John Geen
    • Thread
    • america ceiling dropped exposed find mounted normal shower supplies surface usa valve
    • Replies: 4
    • Forum: USA
  3. D

    Joining & Boosting Water Supplies

    We have 2 separately metered water supplies entering our property and these feed 2 sets of outside (garden) taps. Can we join together the supplies coming from the meters, put the water through a (domestic) booster pump, then split the output to feed the outside tap systems?
    • dakpoole
    • Thread
    • america boost supplies supply usa water
    • Replies: 0
    • Forum: USA
  4. J

    Will a thermostatic shower mixer work with two hot supplies?

    I won't go into the specifics here because it'd be far too long, but in a system I'm building I have two hot supplies - one between 25C and 35C, and one between 45C and 70C. (In short, I have two heat sources that perform differently under different conditions). I want an output temperature of...
    • justcarter
    • Thread
    • hot mixer shower shower mixer supplies thermostatic work
    • Replies: 2
    • Forum: Ireland
  5. B

    Implications with having two gas supplies in one building

    Just starting on a project that involves installing a new gas supply U40 2 inch job but the client already has a very old u16 supply which is piped from a remote meter box and underground steel pipe. The pipework cannot deal with the increase in demand required (quite frankly its not really up...
  6. B

    Thinking of starting a plumbing and heating supplies bussiness

    I have been a plumber for nearly 15 years and made good living from it, and saved quite a lot of money since I been living with my family. I am really thinking of using a office space and buying boilers and heaters and stocking and selling them, what I have noticed is plumbing and heating...
  7. Gasmk1

    commercial laundry parts and supplies

    i have a friend who is setting up a new venture he has worked in this field for quite a few years and decided to set up a company, will give details when site goes live mark
  8. U

    Increasing Hot Water pressure (Shower)

    Hi Guys would somebody be kind enough to advise what the best way is to increase the hot water pressure from the shower please? we have a conventional boiler setup. Many Thanks
    • Unregistered
    • Thread
    • answers hot hot water hot water pressure pressure receive shower supplies water water pressure
    • Replies: 5
    • Forum: Plumbing Jobs | The Job-board
  9. S

    Low head pressure tmv suitable for unbalance supplies.

    Got a 'doc m' pack to fit soon in a working mens club, the hot is being supplied via a wall hung water heater, the type being fed by a little cistern above, the height of the water level is approx 2m above floor level and the tmv for the new wash basin will be approx 1.5m below water level. and...
    • Sharp Point
    • Thread
    • approx basin below head level pressure suitable supplies tmv water
    • Replies: 6
    • Forum: Plumbing Jobs | The Job-board
  10. J

    Thermal stores and private water supplies.

    Hi, we want to install a thermal store to link a Rayburn 355, conventional oil boiler (as backup) and solar. Our main hurdle is all the thermal stores we have found require mains cold water supply for dhw. Whilst there is reasonable pressure from the pumped water supply, it is unlikely to be...
  11. G

    Connecting supplies to a bath

    Hi guys, I hope you can help. I have to do a bathroom install as part of my plumbing course. I have to use copper connections for the supply pipes for the bath. The pipe coming from the ground into the iso valves has to be clipped back to the wall so I'm guessing there will be a slight offset...
  12. B

    shower for unbalanced supplies

    what is the best shower for unbalanced supplies and these are very unbalanced and it is a negative head I know digital has better temp control because it measures faster but do they balance better
  13. T

    Hot and cold supplies

    Bungalow. Cold water tank in loft on flooring. Hot water tank below. I'm thinking it would be better to run hot and cold supplies under screed to bathroom rather than run across loft and drop into bathroom. Didn't want to dig floor up, so are there any problems running pipes across loft?
  14. 3

    Oxfordshire Tiling Supplies (Stockists 365-Drills) Tile Drills holes

    Oxfordshire Tiling Supplies (Stockists of 365-Drills) 01235 364 920 - Ask for Hazel As of August 2013 OTS carry the FULL range of diamond cores and tile drilling bits to drill holes into the hardest porcelain tiles. You can find OTS or Oxfordshire Tiling Supplies at Tiling...
  15. A

    repiped hot and cold supplies now low pressure on hot what could the problem be?

    Hi guys just finishe a job running new pipe from the mains to the kitchen and bathroom hot and cold supplies. Customer has just phoned me and said that the pressure is low. The old pipe was wider than 15mm and i think it was lead. Now it's all 15mm. Is that the problem? Hoping to get some...
  16. T

    cold water supply to handbasin mixer tap

    Hi need help please,my wash hand basin has a hot water feed from the storage tank and a cold water mains feed to the two separate taps ,I would like to put a mixer tap in so do I need both feeds from the header tank and would it be ok to take a 15mm branch of the 22mm pipe that feeds my bath...
  17. M

    hole saw kits

    Hi, which hole saw kit would you recommened please, for general plumbing? looking at £50-£60 bracket. Matt
  18. S

    plastic pipe inserts

    Hi all Can anyone tell me if it's ok to use floplast 15mm pipe inserts with speedfit pipe. THANKS IN ADVANCE
  19. N

    Unbalanced supplies problem

    Hi all, Some advice/help please. Fitted a thermostatic shower suitable for low pressure on what I thought was a balanced gravity fed system, teed into bath supply. Turns out the cold supply is actually mains and so the shower is working properly when turned over to hot it just trickles out...
  20. O

    who can legally move gas meter supplies ?

    ok just a question out of intrest really was reading one of the product catlogues today while sat waiting in the van i think it was BES and flicking through noticed that they sell all the gas mdpe products fittings etc and my question is who can move the meters ? i was under the knowledge that...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Forum
Plumbers' Talk
Tile Cutters
Tiling Forum UK
DIY Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock