Hey if fitting a shower tray on sand and cement is it ok to fit it straight on to the floor boards? As long as there isn't much movement in the floorboards.
Hi
I have 2 questions really
1. Does anyone recognise the attached photo? It is from a shower tray that is being removed from my local merchants so I can get I at a steal of price BUT it has no normal waste hole, just what I am going to try to attach a photo of.
2. I need a shorter than...
I don't fit many showers - anyone got tips of best way to seal the enclosure to the tray and buld the enclosure- did a lewis and cook one last wk and it was awkward to assemble the panels on my own
Does anyone know of a shower tray where you can ask for the outlet in a certain position. We were hoping to set first floor shower tray as low as possible and have the trap between the joists but the outlet of the tray we were thinking of buying would come out directly on to a joist. Plumber...
Hi
I have made some bathroom decisions according to your expert views on this site.
Please can someone recommend top brands for shower trays?
I had Zamori in mind but was put off because someone said acrylic was no good! So am looking at what was suggested stone resin trays - have anyone...
Hi all. I have a Motorhome with a plastic shower tray. Its thin plastic, not like a household tray. It has a crack in it. Any ideas what to use please? Access from underneath is almost impossible and as the tray is moulded with a toilet and basin on it replacing it( or obtaining one) is not an...
Got a customer who thought their tray was cracked, but im pretty sure its just a scratch. Its about 30mm in lenght, and the thickness of a hair. Anyone know of any good ways to fix this, I've used bath repair kits before but thought they were just for chips etc
Hello everyone. Just would like to know how do I know where to fit a shower trap before a timber floor goes down. It's a square tray. Is there a rule of thumb where to position the trap before the floor goes down and the tray is fitted? Any help would be great thanks all.
Dannyparty92
Thread
access
floor
position
showershowertray
trap
tray
where
Whilst checking drain hole in shower tray, I noticed that there is a good few inches of water lying in the base.
Excuse my ignorance, but is this normal or should this water have drained away.
Any advice would be appreciated.
gordmar
Thread
base
drained
inches
lying
should
showershowertraytray
water
i have got an old shower cubicle in my en-suite and it's leaking. i want to replace it with a bigger shower tray and a slide shower screen. i have measured from wall to wall (one external wall, one stud wall) it's 1050mm, with those plastic panels install i think it will be about 1030- 1020mm...
my shower tray don seem to emty very kwik i did pour some drain cleaner down there, and it do swirl more now ... every now and then it do not swirl and stops swirling why is tihs.... somebody said to me today to put your foot on the shower oultet now and then and pump it... will tihs help it...
Hi, just a novice question. I am fitting a 1200 x 700 acrylic shower tray that has 6 legs but I am concerned that there is no support at all in the middle. Is this ok? Seems sturdy enough but will it hold the weight?
Regards
Tony
Hey All,
I'm currently doing a DIY bathroom refit. Can anyone help with this one.
Bought a shower tray from ebay. Its a brand new Wickes 27mm ultra low profile 900x900 quad (plastic type not stone), B&Q do an identical model described as Cascata 900x900 ultra low tray. Need a low tray due to...
lozoid
Thread
help
installing
profile
showershowertraytray
wickes
I am installing a 1200 roller shower door in an alcove above a 1200 cast acrylic shower tray and the instructions say I need to drill 2 holes in the front top edge to fix a retainer clip for the side panel and a guide for the sliding door. This is making me nervous! Can I do this, and if so...
tonytimms
Thread
drill
drilling
regards
screw
should
showershowertraytray
I need to allow 10mm for the front panel of the tray, so have to cut the ply the tray sits on at the front 10mm short and hence it wont support the tray for the front 8cm as there's a big gap behing the front. Is this okay or do I need to do something else/differently? What do you guys do?
I'm...
Spada01
Thread
diy
finish
front
panel
showershowertray
support
tray
where
which
Hi everyone
I have spent 4 solid days this week trying to find a 760mm quadrant shower with glass doors but had no luck at all :banghead:. My shower room is very small and the shower has to fit beween two pillars which is 790mm wide, I dont want a square shower as it will take up more room than...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.