I have a single lever pull out kitchen faucet installed. The tap takes a hot and cold water connection, the cold is from the mains so is at a higher pressure. The hot is from the system boiler so is at a lower pressure. It seems to me that when I open the tap, the cold water is forcing its way...
I understand that its normal for output flow from a combi to reduce when the inlet cold water flow is reduced (when other outlets are opened) but is there a method/process/configuration that can be adopted to minimise the effect in the the drop in flow and in doing so, provide a priority flow...
I'm having an issue where I am getting a buildup of condensation on the cold water pipe in my home that is located in my kitchen.
I have insulated the pipe with plenty of foam but it's still doing it, It's then running down the pipe and down my stop tap and onto my wooden floor.
The cold water...
Hi all. My customer has a bath shower mixer that gets cold from the mains and hot from a vented cylinder and the cold knocks out the hot. I'm thinking about putting in a thermostatic bath shower mixer but would appreciate any other ideas! Cheers all/
Hello there guys,
We've recently discovered (after a drop of water hit my brother on the head!), that a cold water copper pipe is sweating. We thought it might be a leak but have only seen droplets of water on the pipework and after some research have deciphered that the pipe is sweating. The...
Having problems with a recurring air lock in the cold water system which is tank fed. Every couple of months it dribbles out very slowly hot water. Not full flow but just a dribble. I use a wet vac to suck the air out every couple of months but it re occurs.
Is it possible it’s due to a faulty...
Hi all,
New to the forum! So we have 2 bathrooms upstairs in our house, and one half bath on the main floor. This morning the cold water is not working in just one of the bathrooms upstairs (sinks, toilet, tub/shower). It works everywhere else in the house. Also, hot water works everywhere. We...
I renovated my bathroom and kitchen recently and installed new piping+ faucet + thermostatic mixer and new dishwasher in kitchen, the work was done by a professional plumber.
I have noticed that during the night I use cold water when all the taps are closed( around 9L each day, it has been a...
Due to our kitchen being refitted the mains cold water supply has been moved to a new location 12 inches from the original location. Now when I use any cold tap in the house I hear a rumbling whining sound. My plumber tells me that he has used the original stopcock and pipe so this sound must be...
Boiler is Worcester Heatslave external 18/25. We were notified of a pending power-cut for today a few days ago. Electricity was due to be off for 12 hours but fortunately came back on after about 6. I assumed that I'd be able to draw the hot water from the 51 litre tank whilst the power was off...
Hello team,
we just moved into a new house and after a day of cleaning we thought to test the water pressure while both the showers are on (one located in the main bathroom downstairs, one in the ensuite on the first floor). While the pressure was okay (or at least, better than the previous...
I have a hot water and cold water pump in the house for the bathrooms in a 3 strorey victorian house. the pumps are not stopping. can someone help. I am in SW116AB - Clapham
Hi, I'm new here and appreciate any help or ideas on the below.
I suspect there's a underfloor leak as I have a damp patch on the wall, rotten floorboards and skirting boards between the bathroom and the living room. Leak tracing (gas, thermo, acoustic) concluded there is no leak despite the...
Hi all,
We have a low-pressure gravity system, with the water tank in the loft. We have always had a problem with cold water running out (i.e. if my wife has a bath and then I have a shower straight after (we have a power shower), more often than not the shower runs out of water halfway through...
Please can anyone give me advice. The overflow from my cold water tank started dripping so I changed the complete valve and ball. I set the ball to maximum on the arm and still it continues to trickle water. Would changing the 4 1/2 inch ball to a 6 inch ball help. Any help to stop this...
I live in a flat with very low mains water pressure, worst since lockdown for some reason though was told the water board had lowered rather then have a hose pipe ban.
The problem is a slow filling tank after a power shower. I have put a regulator on the shower head to slow flow.
Is it possible...
Morning, hope there is someone to help with this issue. I have a client who is experiencing issues with her shower valve. MAnual only not thermostatic. It is admittedly one at the cheaper end of the market. But only manual as I say. Whilst showering she experiences periods of cold/cool water...
Tried running the hot tap then checking to see what the water temp of the drip was after and it was cold so to me that means the leak is from the cold water valve side. Replaced the cold water ceramic disc cartridge but the drip is still there (even when I turn off the mains but don't fancy...
Renovating an older property with good water pressure. Proposing combi on 1st floor, but am not sure if it should be 1st take-off... If it were to be it would mean doubling back pipework to kitchen and then back upstairs to service sinks etc.. Then there is the electric shower supply... Any...
I have two 114 litre / 25 gallon cold water storage (header) tanks connected in series in my loft. They feed the cold water taps on my baths (including the showers) and the hot water cylinder. They are open top, rectangular tanks, but have insulation jackets with integral lids - that is, the lid...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.