- Messages
- 7,272
C plan EVEN
Discuss Different boiler temps required for hot water vs radiators. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I have my boiler set at 70C. It rarely goes over 40C. This will need to change if a cylinder is installed.
Look up balancing.
C-plan looks exactly as I envisioned, with the zone valve on the rads. Is this a common setup?
We do not understand this statement please explain what you mean?
My current setup seems reasonably well balanced, no hot or cold spots in the house. All the rads have thermostatically controlled regulators. What do I need to know about balancing that can help me in this?
I set the boiler temp to 70C. Before it gets much over 40C, the main house thermostat stops calling for heat. I guess my house has more radiator capacity than it needs, but I guess low return temps will be good when I eventually have to convert to a condensing boiler.
Reply to Different boiler temps required for hot water vs radiators. in the Plumbing Jobs | The Job-board area at PlumbersForums.net