Search the forum,

Discuss worcester 15/19 hot water lacking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

ben5192

Gas Engineer
Messages
31
Hi guys/gals
Iv been outa worcester 15/19 today, customer turns on hot water on programmer, boiler fires, heats up store no prob(no heat to rads-diverter seems ok) 12 mins and reaches temp and turns off- all fine but,

after 1 shower and waiting 15 mins second shower is nothing like warm enough....
any ideas,
thanks in advance
Ben
 
Maybe the store stat isnt recognising the temperature drop or getting stuck to satisfied? Id be checking that. Easy enough with a meter. BTW, most people run combi's on permanent DHW.
Ring WB with a meter in your hand (assuming you are competent etc), very helpful.
 
Status
Not open for further replies.

Reply to worcester 15/19 hot water lacking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
138
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock