Search the forum,

Unusual Washing Machine Waste Drain

Post new thread

Discuss Unusual Washing Machine Waste Drain in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

J

JamieD

Hi All,

I'm plumbing in a washing machine into our new house and rather than a normal waste pipe this house just has a hole in the ground. It looks as if the hole used to be a 40mm pipe but it has been sawn off at ground level such that the top of the pipe is flush with the floor tiles. This means there's no pipe sticking out to fit a connector on to. Is there a product that will fit inside the hole (internal diameter is about 38mm) and have a normal waste connector on the other end?


Thanks in advance,

J
 
Need to dig down a couple of inches sorry to say you sure it’s drainage ?
 

Reply to Unusual Washing Machine Waste Drain in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
DIwhYdidIstartThis
D
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
39
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock