Discuss Unusual Washing Machine Waste Drain in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

J

JamieD

Hi All,

I'm plumbing in a washing machine into our new house and rather than a normal waste pipe this house just has a hole in the ground. It looks as if the hole used to be a 40mm pipe but it has been sawn off at ground level such that the top of the pipe is flush with the floor tiles. This means there's no pipe sticking out to fit a connector on to. Is there a product that will fit inside the hole (internal diameter is about 38mm) and have a normal waste connector on the other end?


Thanks in advance,

J
 
Need to dig down a couple of inches sorry to say you sure it’s drainage ?
 

Reply to Unusual Washing Machine Waste Drain in the Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Creating content since 2001. Untold Media.

New Threads

Some Stats

Threads
98,759
Messages
1,073,045
Members
25,557
Latest member
Kaus85
Back
Top