Search the forum,

Discuss Unusual Tap Washer Needed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
33
I have a problem with the hot tap on a commercial kitchen tap where the hot flow slows to a trickle,
I believe the problem is the washer swelling up and restricting the flow and have never seen one with a spring before.
Kitchen tap.jpg1.jpg Kitchen tap.jpg2.jpg Kitchen tap.jpg
I think the tap may have come from ebay and possibly China,
Any ideas where to get spares?
 
I've only ever seen this once.
I was down in the west country and a plumber came in with one whilst I was doing breakfast morning. All I recall was that I solved his problem by pinching the spring out of a retractable pen (fitted perfectly). It was cut down slightly and expanded so it then worked. Aside from then and now, I've never come acrosss them.
 
We had a situation a little while back with springs on the tap washers.
Basically they were put there to stop water hammer.
We removed them and never had a problem since.....as far as I am aware.

Try running the tap without the springs
 

Reply to Unusual Tap Washer Needed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
240
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
251
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock