Discuss underfloor heating controls in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gazbo

Having fitted ufh to my conservatory i want to control my remeha broag 24v heating boiler from the conservatory stat alongside my y plan controls.when i connect up it tripps the rcd feeding the boiler.Do i need to change my y plan for a s plan plus so i can run 3 zones to the boiler,ie house ,conservatory,and dhw,Gazbo
 
if its tripping an RCD it means you have an earth fault, this means somewhere its wired incorrectly.
 
It does not trip the rcd until the house stat is turned up,but only trips when both zones are callin for heat.I think the rcd is reacting to a back feed through wiring.Have checked my new cabling and their is no earth fault
 
Status
Not open for further replies.

Reply to underfloor heating controls in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock