To all Grant installers

[WHPES]

Not a lot much more if you buy them in bulk

 

[MarkOil]

I don't know of anyone who use's inserts on 10mm pipe. Just nip the olive up, undo fitting add Rocol, do back up and don't over tighten, works every time, no leaks for me.

 

[Dotty]

I don't know of anyone who use's inserts on 10mm pipe. Just nip the olive up, undo fitting add Rocol, do back up and don't over tighten, works every time, no leaks for me.

I'm the same. Except I use Heldite.

 

[SimonG]

Heldite over here is like rocking horse poop. Used to get a little bottle with a tank fitting kit. Prefer it far better than rocol.

 

[Dotty]

Plumbcenter stock it Si, or there's this place if you don't fancy spitting everywhere.....

Heldite Jointing Compound - The UK Superstore for Oil & Fuel Products & Oil Recycling Technologies

 

[WHPES]

If I ever use 10mm compression fittings (which is once in a blue moon) I always use inserts.

I have a litre pot of Heldite and I use it to top up a small pot which I keep in the toolkit.

 

[Roger Welton]

HWOS stock heldite don't they?

 

[SimonG]

I have asked before and not had any. Just done a search on the trade store as well. No heldite there. Going to order quarter of a litre from the link Croppie posted.

 

[Bunker]

I just bought some on ebay, he has plenty. I asked for 2 x 125ml rather than 1 x 250.:

Heldite | eBay

 

[Pipes Plumbing]

If you get stuck without Heldite, Halfrauds sell little tubes of Hermetite Red which works too and is approved for oil.
Expensive for what it is but can get you out a hole when the pot of sealant has disapeared off the van somewhere,

 

[Lou]

I am updating threads. If this is not current then please visit the Oil & Solid Fuel Forum and post a new thread.