should i have a room thermostat with my combi boiler.

[baileys]

I'd like to see the boiler, the flue, the pipework to the boiler and the gas meter please if poss.

Ok thanks, i will get my son to take some pics and post them, he will be home soon.

 

[baileys]

I'd like to see the boiler, the flue, the pipework to the boiler and the gas meter please if poss.

Here are the photos

 

[Rickster123]

The flue needs sealing inside and the pipework is extremely close to your electrics.
Is your gas meter next to the boiler cupboard? Where does the white waste pipe run to?

 

[Rickster123]

And you need the gas pipe earthed.

 

[baileys]

The flue needs sealing inside and the pipework is extremely close to your electrics.
Is your gas meter next to the boiler cupboard? Where does the white waste pipe run to?

The gas meter is in the cupboard next to the boiler and the white pipe goes into the sink waste.
I did ask if the boiler could leak as its so near the electrics and he said it shouldn't.

 

[Ermintrude]

He's basically taken your money and run. Your family is going to be affected by this so why not let his family know what an a$$hol£ they are related to. I would be reporting them both to gas safe. 1. The 'plumber' illegally installed appliance ( the gas pipe is not the only bit you must be gas safe registered for, who out of interest decommissioned, purged and capped old supply? )
2. The muppet who connected the gas and fraudulently filled in paperwork? Yes he commissioned it but he was complicit in the installation by the 'plumber'

 

[baileys]

He's basically taken your money and run. Your family is going to be affected by this so why not let his family know what an a$$hol£ they are related to. I would be reporting them both to gas safe. 1. The 'plumber' illegally installed appliance ( the gas pipe is not the only bit you must be gas safe registered for, who out of interest decommissioned, purged and capped old supply? )
2. The muppet who connected the gas and fraudulently filled in paperwork? Yes he commissioned it but he was complicit in the installation by the 'plumber'

I know, you are right in everything you say but the people i have spoken to about it just tell me to get someone else in. How do i know though that the next person is not going to rip me off and start wanting to replace things that dont need doing, its taken me a long time to save up for my heating.
Im also not the type of person to let someone get away with doing this to me, they are making me look stupid and its winding me up even more.
Ive tried explaining to them that i need a fulling working legal system but they think what they have done is ok, they dont see no wrong in it.

 

[Ermintrude]

Well . First thing is take some photographs of the work and we can all pick fault,,, but then actually give you a list which you must get sorted, a list if what you might like to get sorted and a list that you can sort?

Firstly as previously requested photos then some of the radiators.

Where are u located?

 

[basildog]

My advice would be to contact someone maybe from a reccomendation from here ask for a quote to bring up to spec and give the original guy say 7 days to correct or you will claim cost of work from him ?
A lot depends on whether it was a mates rates job or you have a full paperwork trail ?
Might be worth contacting Gas Safe you would have to ask the guys on here as I am not in that club and not sure I want to be !
Maybe post your quote if you have one you can hide the installers details .

 

[Ermintrude]

Why hide installers details ..... Unless they are mine ? Name and shame the doosh!

 

[Worcester]

I couldn't actually see any bonding, (earthing), certainly should have been tested to ensure Zs of earth terminal adequate. Also looks like none of the pipes are supported.

Ther are lots of reasons why your newly installed boiler isn't building regs compliant. Hope you haven't paid them in full yet.

Who is responsible for meeting the requirements of the Building Regulations?
Whoever carries out the building work should be responsible for ensuring that the work is compliant with the Building Regulations. Responsibility ultimately lies with the building owner though, who may be served a notice if work doesn't comply with the Building Regulations.

 

[basildog]

Is that an airbrick in picture 1 ?

 

[tamz]

I couldn't actually see any bonding, (earthing), certainly should have been tested to ensure Zs of earth terminal adequate.

Not in the scope of most gsr's as you know and no requirement to do so. Only requirement is to inform the householder to get it checked usually with a pre-printed card.

 

[baileys]

My advice would be to contact someone maybe from a reccomendation from here ask for a quote to bring up to spec and give the original guy say 7 days to correct or you will claim cost of work from him ?
A lot depends on whether it was a mates rates job or you have a full paperwork trail ?
Might be worth contacting Gas Safe you would have to ask the guys on here as I am not in that club and not sure I want to be !
Maybe post your quote if you have one you can hide the installers details .

I wouldn't call it mates rates as his quote was only a couple of hundred less than the other quotes i got. He only wrote the name of the boiler on the quote that he was installing. He did tell me that if i wasnt a friend then his price would of been three times the amount, i told him that he wouldn't of got the job then, so yes he thinks he has done me a good deal.
So basically im screwed, i will get over it soon but i hate the thought of him getting away with it. He is so smug, he sees no wrong in what he is doing.

 

[basildog]

This looks like a totally new installation to me with new wiring new gas meter etc ?
Whoever did the electrics would need to be certified ?