Discuss Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
 
No it doesn't the given sizes are clear sizes so after them your fine
 
Hi
I'm about to refit our kitchen, but have a pretty ugly Sabre 29 HE boiler in one corner. Am I able to build this into a kitchen cabinet?

The installation guidance gives a minimum clearance at the front of 600mm, but does this include a kitchen cabinet door?

Thanks in advance.

Mike
If you are fitting a new kitchen do you have the budget to change the boiler at the same time?
 
Hi, sorry I'm probably being dumb, but I don't think I understand. Is it ok to put it in a kitchen cabinet?

Yes fine just make sure it can be removed when you decide to change the boiler
 
Harvest makes a good point , the last thing you want is to be changing the boiler after the kitchen is fitted , yes ok its fine now and hopefully will be for a few years to come , have you any idea how old it is , if its under 5 forget it , if its approaching 10 , I would seriously consider it . My opinion of course .
 
I agree i would seriously consider changing it you will achieve a better finish on your new kitchen as a modern boiler is alot smaller . cheers kop
 
Status
Not open for further replies.

Reply to Sabre boiler in kitchen cupboard in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
596
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
322
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
325

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock