I have a customer who owns a fish shop and has asked me to plumb in the water supply. He requires a sink unit with a water supply from 15mm copper fittings. However he has to move the sink frequently to clean behind the unit and i would like to fit quick release couplings onto flexible pipe to make the cleaning operation quick and easy. What couplings can you suggest please?
Discuss Quick release couplings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
Perhaps, if you could get them WRAS approved and therefore suited to drinkable water, but not really designed for the application
- Messages
- 34,368
- Solutions
- 2
Why not mount the taps to the wall and have a compression coupling for the waste
- Status
Reply to Quick release couplings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...