Search the forum,

Discuss Leaking solvent weld joint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
40
I installed an external soil pipe, however the 4" solvent weld connected is leaking, tried to wipe more glue on but still weeping. I'll be taking out and renewing but there's a lot to take out then replace, do any of you have any sensible suggestions or know any product that will fix?? Cheers
 
Anything you use will only be a temporary repair.....you can try solvent weld gap filler but it really needs to be dry to work best of luck regards Turnpin:yes:
 
yea if I ever have a solvent weld leak, I use a digital heat gun on low setting to warm it all up nicely and then bang a bit more glue in.
if the joint is a small one, you can easily separate it completely.
 
Status
Not open for further replies.

Reply to Leaking solvent weld joint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
243
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock