Is it okay to plumb whole room with polyplumb?

[BobWillis]

I'm having an en-suite redone, part way through, and I've noticed that the plumber has put in mainly flexible (PB) pipes, with push fit (polyplumb) fittings. I was a bit surprised, since I thought normally most of the pipes would be copper with welded joints. So my questions are:

1. Is it okay to use this stuff for long horizontal lengths (about 1.5m)?
2. Is it okay having concealed (and inaccessible) copper -> plastic joints with push-fit (polyplumb)?
3. Is it okay for central heating?

If it's not okay, I want to get it rectified before it's all plastered and tiled over.

Thanks

Bob

 

[bigman]

Yes it is okay if you were in a new build you would be lucky to have any copper at all

 

[tamz]

Its called modern plumbing. Some love it some hate it. Like many other things in the world, this trade is becoming de skilled. Btw i hate it. Most times it looks like a dog peeing in the snow unless it is properly fixed which it never is, but it can be useful. It does the job.

 

[SimonG]

If you are having the floor tiled then i would prefer copper and soldered joints. But then again it depends what you are paying. You a8nt gonna get rolls royce install for skoda money.

 

[SimonG]

By the way, thought you bowled tremendously for england

 

[SimonG]

No James Anderson, but still pretty good.

 

[Ray Stafford]

My entire bathroom was 100% Polyplumb for the last 15 years. I just had it re-done, and had the lot ripped out and replaced with copper. I can't really say why, except that we were having an expensive wooden floor laid and I am an old fogey.

In fairness to Polyplumb, I guess I was being a bit unfair. 15 years is a long time to go without a problem. We did have a problem back in the early days, but that was installer error - forgetting an insert on a cold main.

 

[WHPES]

Having started in industry, I'm one of those copper fans. There are a lot of what we call disparagingly "plastic plumbers" around these days, many of them are builders who think they can do plumbing. Personally I hate it as it looks untidy and suffers from rodent damage. Long term longevity is unknown but I doubt it will last as long as copper without giving problems.

 

[tamz]

Long term longevity is unknown but I doubt it will last as long as copper without giving problems.

It won't last as long as copper but i still come across the odd bit of acorn that has been in for over 30 years now.

 

[acecharly]

Its good for saving money, easier to install, less fittings, can be fed where copper wont....aslong as its installed correctly I think its ok but there lies the elephant in the room....correctly installed.

 

[Mike Jackson]

It won't last as long as copper but i still come across the odd bit of acorn that has been in for over 30 years now.

Depends on the water quality. I've seen copper fail in a couple of years. I prefer copper but regularly use plastic because it speeds the job up and makes my pricing more competitive.

 

[kozak1968]

Just finished a job in copper. The customer requested it from the start and cost was not an issue to him. Like what's been said before, alot of people won't pay the extra. I have not had any problems with plastic when its hidden.

 

[BobWillis]

Thanks for all the replies. That's reassuring. I was worried no-one did this and it would fail after a couple of years. I don't care about it being ugly because it's behind a wall.

It's great to be able to consult knowledgeable people so quickly when there's a concern...thanks again all!

 

[Killy Bing]

Thanks for all the replies. That's reassuring. I was worried no-one did this and it would fail after a couple of years. I don't care about it being ugly because it's behind a wall.

It's great to be able to consult knowledgeable people so quickly when there's a concern...thanks again all!

whos putting it in??

 

[TBServices]

I never use plastic in bathrooms. Nightmare waiting to happen once it's all tiled.

I had to rip a chip shop half to bits to find a leaking speedfit tee a few weeks ago. If it had been copper, it wouldn't have fallen off