Discuss Hepworth Plumbing fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 10,033
I don't use plastic push fit, but I have come across the green plastic gripper in Hep fittings broken into segments. No idea if that happened when the installer was pushing the fitting on, perhaps carelessly not in line, or if it just happens later.
- Status
Reply to Hepworth Plumbing fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi there,
I am hoping someone can give me some advice. We have had two leaks at home in the last 2 weeks; luckily we were in for both events and...
I had a new Grandfos UPS3 pump fitted today, and am trying to set it up. I want it on 2nd setting, but having problems. The green light is on...
Hello hello,, Hoping there are some experts or experienced Bulgarian plumbing chaps in this site ?. Here in the UK I can fit a bathroom just with...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hi, I have fitted an electric shower, teed off the toilet cold feed (Mains)
The pressure for the shower is very very poor just dribbling out...