Search the forum,

Discuss gas council number in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
364
Hi all, anyone know g.c number for ferroli domicondens f24, boiler under warranty and thought landlord was getting engineer out so I didn't note it. Need to order a part now, as he said I was to to do job instead.
 
am i right in thinking some boilers that are the same models but can have different GC numbers on the data badge
 
Yes, sometimes manufacturers do different versions of the same model with minor differences.

Sent from my HTC Desire using Tapatalk
 
I have had that issue before when looking for replacement parts and having the correct GC number only to be told they did 2 different gas valves or worse still on a old vaillant to be told it was a hybrid model and the way to tell was Blah blah, I always take a photo now or better still bring the part with me
 
am i right in thinking some boilers that are the same models but can have different GC numbers on the data badge
Maybe that's why I can't find it on any web site, every time I find it there is no number next to it, I have found the f28 version and could maybe go on that for part as its a thermistor.
The instruction manual is about 4 pages, worst I have seen!
Thanks for info, might be a trip back after all
 
am i right in thinking some boilers that are the same models but can have different GC numbers on the data badge
yes or have a different serial number, its to do with manufacturers updating or resolving design faults on earlier released models.
 
most manufactures issue a new number after slight design updates as Rob has said, though its not always done for small changes. Had a worcester combi years ago which had a faulty part that did not match the gc number so had to remove the part and take it to parts shop. It turned out to be an older part from a older model, they must have reverted back to it after problems with a newer designed one.
 
So been back to check g.c number and believe it or not there isn't one. Plenty places they have serial number. I'm really hating ferroli more than ever
 
Status
Not open for further replies.

Reply to gas council number in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
72
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
226
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock