G
Grumman
This toilet is 5 years old and has suddenly started to fill very slowly after using either button. Thought I would have a peek inside to see if I could replace the valve. However, the ceramic lid is not visibly fastened, it will move a cm horizontally but will not lift vertically at all! Definitely something inside is preventing this. I am not familiar with this type, whatever it is and I didn't see it installed at the time. I don't want to use brute force for obvious reasons and logic says that to get at the inside of the cistern, you would have to drain, disconnect the water inlet and unscrew the cistern from the toilet bowl.
I'm a first time poster, and would really appreciate any info on the system and the problem. Thank you in anticipation.
Grumman
I'm a first time poster, and would really appreciate any info on the system and the problem. Thank you in anticipation.
Grumman