Search the forum,

Day 12 Advent Calendar!

Post new thread

Discuss Day 12 Advent Calendar! in the USA area at PlumbersForums.net

Status
Not open for further replies.
Lou

Lou

-
Staff member
Esteemed
Admin
Subscribed
Messages
1,028
Welcome to the Day 12 of the PlumbersForums.net Advent Calendar Competition.

Today's Question

What the name of the person that founded the beginnings of Plumbase?

Hint



Today's Winner Will Get:-

 
H Bradley. Was the original founder. Been sold to the Grafton group in 1994 and the recently cashed it in to plumbing and heating investments LTD for around 60 million.
 
Lou said:
Welcome to the Day 12 of the PlumbersForums.net Advent Calendar Competition.

Today's Question

What the name of the person that founded the beginnings of Plumbase?

Hint



Today's Winner Will Get:-

Click to expand...
H.Bradley founded Plumbase
 
www.plumbersforums.net

Advent Calendar Winners Thread - 2019 - Well done peeps :)

Okay so we've taken a video of us writing the names, ripping them up into bits, sticking them in a hat, then drawing a name. The video appears too big. So we've saved them (for all forums) and will work on what the issue is there this week. We'll get them uploaded ASAP. @Harvest Fields has...
www.plumbersforums.net www.plumbersforums.net
 
Status
Not open for further replies.

Reply to Day 12 Advent Calendar! in the USA area at PlumbersForums.net

Similar plumbing topics

D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
235
Chuck
C
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
261
ShaunCorbs
ShaunCorbs
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
226
DIwhYdidIstartThis
D
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
184
dreikher
dreikher
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock