Search the forum,

Discuss Britony Combi SE with no GC number on the badge plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

manx12

Went to service a Britony Combi SE (about 9 years old) a number of problems.. firstly; installed in the cellar with the PRV open pipe to cement floor
Secondly; no GC number on the badge plate only ***- xxxx-***
Thirdly: it is a 24kw combi installed on a heating system containing 20 rads (big house split into bedsits),
From discussing with tenants the boiler does occasionally lockout, it has not been on since April, when we tried to start it, it was not getting to ignition sequence (will be replacing APS tomorrow)..
what a mess...
 
Status
Not open for further replies.

Reply to Britony Combi SE with no GC number on the badge plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
132
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock