Best Practice - Running Pipes through Dot and Dab Plasterboard

[antsals]

Morning all,

Very quick background; I have 10 year old house, been in it 18 months. When central heating comes on on many of the downstairs rads where the pipe runs down the wall there is always a clicking / ticking noise. I was advised that it is probably where the pipes run through the joist of the house. Lifted floorboards and no joists near it.

I now assume its something to do with the dot and dab and the pipework encased in the adhesive. Something to do with the expansion and contraction of the pipework?

I'm now currently decorating and want to sort the problem. I have exposed the pipework and found that there is no protection on the pipes. Some of the "dot & dab" is encasing the pipework (although I have removed it all from the pipework I have exposed) the pipes are clipped to the wall, but to protect from the wall / cement (I guess) they have used a plstic sheet very similar (if not the exact thing) as what you would use on brickwork and the damp course level. I suppose this could also be makin the noise?

What I'm asking is what is best practice on protecting and running these pipes in the wall to be sure I will eliminate this nosie issue?

My idea....unclip, removed that plastic sheet, use some tubular felt to protect pipe, re-clip to wall, (should I now cover with metal casing like what you would use to protect cables?) or something else? Then I was thinking of filling with plaster adhesive, then skim or should I somehow fill the void so I don't adhevise the pipes?

Any advise / help I would welcome,
Thanks,
Ant

 

[antsals]

Bit of an update.....re-run the pipework felted and clipped up......no noise when they are exposed. It was nothing to do with the joist where it goes through the ceiling they are silent.

Convinced it was something to do with the dot and dab over the pipework. Now i need to work out how to re-plaster over them? Any suggestions?

Ant

 

[TBServices]

You should be okay to just go over them now they're covered in felt.

 

[happyflyer]

Morning all,

Very quick background; I have 10 year old house, been in it 18 months. When central heating comes on on many of the downstairs rads where the pipe runs down the wall there is always a clicking / ticking noise. I was advised that it is probably where the pipes run through the joist of the house. Lifted floorboards and no joists near it.

I now assume its something to do with the dot and dab and the pipework encased in the adhesive. Something to do with the expansion and contraction of the pipework?

I'm now currently decorating and want to sort the problem. I have exposed the pipework and found that there is no protection on the pipes. Some of the "dot & dab" is encasing the pipework (although I have removed it all from the pipework I have exposed) the pipes are clipped to the wall, but to protect from the wall / cement (I guess) they have used a plstic sheet very similar (if not the exact thing) as what you would use on brickwork and the damp course level. I suppose this could also be makin the noise?

What I'm asking is what is best practice on protecting and running these pipes in the wall to be sure I will eliminate this nosie issue?

My idea....unclip, removed that plastic sheet, use some tubular felt to protect pipe, re-clip to wall, (should I now cover with metal casing like what you would use to protect cables?) or something else? Then I was thinking of filling with plaster adhesive, then skim or should I somehow fill the void so I don't adhevise the pipes?

Any advise / help I would welcome,
Thanks,
Ant

Hell 90% of the house built over the last 10 years are all like this, plastic in a wall, I have never heard the great nations house owners complaining to builders from hell on this one, I wear hearing aids so it wouldn't bother me, someone's got bat ears, I could be your eyes 20 20 on that. I might be wrong but I didn't think plastic could make a noise, chaps on here think it's so good it could never do that. :2guns:

 

[antsals]

Happyflyer its not plastic its copper pipe......theres something going wierd with this one.....def something to do with how the plaster dot and dab is retaining the pipework. I'm guessing becuse it retains it in area's and doesn't in others it makes the sound. I bet I could record it....if you really want to hear it!

Ant

 

[antsals]

You should be okay to just go over them now they're covered in felt.

When you say cover just fill with deep fill plaster then skim over?

Ant

 

[TBServices]

When you say cover just fill with deep fill plaster then skim over?

Ant

Yeah, the felt should accommodate any expansion.

 

[happyflyer]

Happyflyer its not plastic its copper pipe......theres something going wierd with this one.....def something to do with how the plaster dot and dab is retaining the pipework. I'm guessing becuse it retains it in area's and doesn't in others it makes the sound. I bet I could record it....if you really want to hear it!

Ant

Sorry Ant,

I miss read that, if it is your right, but there is another point which you may have missed the plasterboard is acting like a drum, a sounding board even had it been installed as it should have been boxed in on the surface and clipped it would still tick, trapped behind the PB and stuck in places with dabs you have no chance of keeping it quiet, I would be pulling it out of there and dare I say this, this is one for plastic, hell that left a taste in my mouth like putting my tongue on a 9 volt battery, make a few of you very very happy.


Tony

 

[lame plumber]

Sorry Ant,

I miss read that, if it is your right, but there is another point which you may have missed the plasterboard is acting like a drum, a sounding board even had it been installed as it should have been boxed in on the surface and clipped it would still tick, trapped behind the PB and stuck in places with dabs you have no chance of keeping it quiet, I would be pulling it out of there and dare I say this, this is one for plastic, hell that left a taste in my mouth like putting my tongue on a 9 volt battery, make a few of you very very happy.


Tony

i'd agree that plasterboard can act like a drum on stud work but on dot n dab it could not have that effect at all, but the issue this guy is having has never occurred on any dot n dab with pipe set behind it Ive installed. the only thing i can think of is that the copper is pushing against something on an elbow where it cant expand and this is ticking away. To have pulled a wall apart for some ticking is a first and seriously ocd.

 

[happyflyer]

i'd agree that plasterboard can act like a drum on stud work but on dot n dab it could not have that effect at all, but the issue this guy is having has never occurred on any dot n dab with pipe set behind it Ive installed. the only thing i can think of is that the copper is pushing against something on an elbow where it cant expand and this is ticking away. To have pulled a wall apart for some ticking is a first and seriously ocd.

Might be ticking from further back that is resonating, I still think that the hollow gap in the back of the PB might amplify the sounds, you need to be there to make an assessment, its all guess work third forth and filth hand

Tony

 

[Keefy]

To have pulled a wall apart for some ticking is a first and seriously ocd.

I hope he didn't pull a clock off the wall before he started hacking away.

 

[Dotty]

Wouldn't be the first time someone's run around looking for a leak or trying to cure pipe noises because of a clock ticking!

 

[Keefy]

Wouldn't be the first time someone's run around looking for a leak or trying to cure pipe noises because of a clock ticking!

Is that an admission?

 

[lame plumber]

most people in ireland near the borders are used to listening out for ticking, its what kept them alive most of the time

 

[Dotty]

most people in ireland near the borders are used to listening out for ticking, its what kept them alive most of the time

Still do. Second nature checking under the van now.

 

[lame plumber]

Still do. Second nature checking under the van now.

nice to know your popular in the provinces