Search the forum,

Discuss air in ch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

paver 59

ive come to the point where it must be air in my system as to the reason why my rads downstairs are not geting warm. i undid the screw on the pump and air came out for at least 4 hours until i got sick of empting the bowl so then i went to the nearest rad and started to bleed from their again for at least 4 hours an air still comes out how long will it last or is it a case of how long is a piece of string?
 
Sounds as if you are boiling what little water that is left in your system? Make sure your boiler is switched off and vent the rest of the air - check that the flex hose from the fill up is not blocked - if it is clean it out & refill the system until you have water in the rads ? Hope your heat exchanger isn,t goose'd?
 
Status
Not open for further replies.

Reply to air in ch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
161
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock