Search the forum,

shower mixer

A shower is a place in which a person bathes under a spray of typically warm or hot water. Indoors, there is a drain in the floor. Most showers have temperature, spray pressure and adjustable showerhead nozzle. The simplest showers have a swivelling nozzle aiming down on the user, while more complex showers have a showerhead connected to a hose that has a mounting bracket. This allows the showerer to hold the showerhead by hand to spray the water at different parts of their body. A shower can be installed in a small shower stall or bathtub with a plastic shower curtain or door. Showering is common in Western culture due to the efficiency of using it compared with a bathtub. Its use in hygiene is, therefore, common practice.

View More On Wikipedia.org
  1. P

    1/2 inch to 15mm Shower Mixer Leak

    I need a bit of advice and encouragement. I am setting up a shower mixer which had hot and cold in, and supplies two showers. Each of the four connections is 1/2 inch female thread, so I have four 1/2 inch to 15mm connectors screwed in. 3 of the 4 are fine, but I cannot get the 4th to seal...
  2. A

    teka shower mixer tap

    Hi all - mixer tap with very poor flow on hot side ( cold ok ) - it's a Teka model with a single lever on some sort of ball socket affair. Problem is I cannot seem to find any way of getting inside the tap to find what the problem is...under the lever there is a chrome cap which is loose and...
  3. W

    Cutting off bath shower mixer. Literally.

    Due to terrible access and 25 yr old tap conns and backnuts cannot remove bath tap mixer. Suggest can either remove bath or cut taps off from above - the latter has been chosen. I've cut about 3 or 4 taps off before with a hacksaw, all have been kitchen monoblocs and that was fun enough. It's...
  4. A

    Albion Bath Shower mixer, Diverter

    Hi Can anyone help, i need to fit a new diverter valve to a Albion Beaufort Barth Shower Mixer but cant work it out. the new diverter has an offset spindle. inside the body of the tap is a plastic circle with a cut out in it. i have screwed the valve in but doesnt sem right, not sure how it...
  5. M

    Help - bath shower mixer seized - no one seems to know what to do!

    The valve on the hot tap of my bsm has failed and I have contacted several merchants and a plumber who don't know what to do! The problem is that the bath is completely sealed in with tiling around the boxing and carpet round the front. If you try to approach the back of the bath from the...
  6. S

    Bath Shower Mixer Tap Identification Pleae Help?

    Have a problem with a bath tap/ shower mxer. I want to try and repair the divertor as it is broken. I cannot just put in a new one in as it will require the tiled bath panel removing and alot of extra work to boot. Does anyone know what make and model this is?
  7. D

    Modifying my shower mixer tap..

    Hi there, I'm hoping someone can help please.. I have this kind of shower mixer tap: Sorry if this is a stupid question but I'm wondering if it's possible to modify the fixings by taking off the shower rest, then reattaching the shower hose directly to the top of the mixer so that it looks...
  8. F

    Can you identify my shower mixer? No markings anywhere...

    I wonder whether you could help me... My shower mixer appears to be broken. It is letting in much too much cold, even when the mixer is turned all the way up to hottest setting. I expect it needs a new cartridge, but I can't identify the shower. Are you able to tell what make and model it is...
  9. X

    Can anyone identify this shower mixer?

    I have an old shower mixer that has worked just fine for ages. Now the grommets inside the body have worn to the point where there is a constant leak even when the shower is turned to the "Off" position. The problem is that I can't find any markings on the unit to tell me the make and model, so...
  10. D

    Shower Mixer Help/Advice

    Hi, Need a little advice please! I'm a bit of a novice and need to purchase a shower mixer for the wetroom ensuite I'm currently fitting.I'm after a concealed 2 way thermostatic chrome mixer and have found some pretty well priced units at companies like Bathempire & Bathroomcash&carry for...
  11. J

    Monobloc Bath Mixer Tap

    I have a bath mixer tap which has just one multifumction handle controlling both hot and cold water. It is dripping badly. How do I change the washer especially how do I get to the washer as it is not obvious to me how the handle is removed.
  12. S

    Name that tap!

    Hi, I have a client with a thermostatic bath mixer tap (photos attached) with a tap head that has lost its thread and won't fix onto the cartridge. The client doesn't know the make/model and there was no indication on tap body. Does anyone recognise this tap so that I can then search for spare...
  13. F

    Bath / Shower doesn't divert properly

    I had an Ideal Standard CONE Bath Shower Mixer tap (B5111AA) fitted in a new bathroom 4 years ago. The tap has always had softened water passing through it. It has had very limited use during the period - e.g. it may not be used for periods of 3 months at a time. (we do have another shower...!)...
  14. P

    Indirect Hot Water Cylinder

    i have a client with a vented indirect hot water cylinder. below the gate valve on the cold feed from the header tank, is a tee which is the cold feed to shower pump for the shower mixer. can anyone tell me if this acceptable practice? i have read that it wouldn't be allowed on a direct hot...
  15. D

    Bath, Shower Mixer Taps and Wc (White) £60

    Hi all,:) This is my first post on this forum (I was looking at info on Accoya wood as I've got some rotten sashes to replace on a property facing the Mersey). I've just re-jigged a bathroom and have got a white acrylic bath and WC for sale, plus the bath panels- £60 the lot, can't split. The...
  16. J

    Yet another mixer tap pressure problem!

    Hi, The hot pressure from my bath/shower mixer has got very low to the point where it’s not strong enough to have a shower. The en-suite shower is fine, good pressure and the hot tap in the bathroom sink is also fine, it fills a cup with hot in about 3 seconds vs nearly 10 for the bath tap. See...
  17. T

    Bath Shower Mixer Tap Problems

    Hi all, please can you help with this problem: My original bath shower mixer tap was 12yrs old and developed a problem so I thought I would buy a whole new similar style unit. I fitted the new taps and all was ok for a week or two. Then i noticed the hot tap would only turn two full turns but...
  18. R

    Bath / Shower Taps - Failed switching valve

    Hi all - I am new to this but I hope you can help me a little. We have an old cast iron bath with the mixer tap with a valve to divert the water to the shower head. A traditional style one - two taps connecting in the centre to the shower diverter valve & then to one central spout. This...
  19. M

    Ceda Sorrento Spa Bath

    Hi, I wonder if you could give me some advice.. I have a Ceda Sorrento Spa Bath which is leaking from the hose that is attached to on off water tap. Ceda have gone bust and i cant find any help on the net. My plumber is unsure how to access the pipes. I think he should turn it upside...
  20. R

    Shower pump failure

    VENTED SYSTEM I recently looked at a job where the shower pump has failed it is only 8 weeks old. The pump is located in the attic at the same level as the storage tank. The shower rose is ceiling mounted about 400mm below tank level. The hot to the pump is feed from the cylinder ( located...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock