You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
inlet
An inlet is an indentation of a shoreline, usually long and narrow, such as a small bay or arm, that often leads to an enclosed body of salt water, such as a sound, bay, lagoon, or marsh.
Looking just to see anyone's view on a situation where the gas boiler is performing as to all manufacturers stated combustion readings and gas rate but has 16.5 mbar inlet working pressure. What's your views on gas industries unsafe situations procedure relevant to this?
Alright?
i've been wondering. we're all hell bent on getting the correct minimum inlet working pressure at appliances, all the more so it seems as many more of us tend to be more and more concerned in meeting the requirements for seemingly bigger and bigger combis in an environment of ever...
Went to replace a torbeck ballvalve and it had a 10mm brass inlet, the 15mm i had with me didnt fit the cistern, Are these common? ive never seen one before, i cant seem to find one doing a search online, i did try swapping tne internals but that didnt work :0( can anyone help? thanks
drips'n'shiz
Thread
10mm
before
didnt
entry
heating
inlet
online
pipework
torbeck
Morning all
After flushing the float happily rises as the cistern fills but when reaches its destination its not switching off the water
I've removed the valve and cleaned it but it's made no difference. Any ideas?
Thanks
korpus
Thread
easier
inlet
not working
oil
remove
removed
roca
toilet
valve
water
working
i have been reading various threads about apparant pressure loss when measured on the gas valve ( underneath the boiler nr yellow lever). I have not managed to get more than 19 mb despite oversizing the gas pipes. thought that at some time i would get banged up in prison for this.
Do I...
Hi,
This is the first 30kw logic that I have fitted this one is giving me that is giving a low reading on gas rating. It is measuring 2.94m3/hr compared to 3.13m3/hr in the MI. - checked more than once.
Inlet OP pressure measured on the test point is 18.5mbar, meter OP is 21mbar. Ideal have...
cascas
Thread
advise
gas
gas rate
ideal
ideal logic
inlet
logic
point
pressure
I have issue with the Ideal Independent 30 - rated at 33.7kw gross (30.4 nett)
The working pressure at the meter is 21mbar, and at the test point on the isolation valve only 18mbar. Clearly over the 1mbar drop allowed in BS6891. The MI mentions a pressure drop between the external gas cock...
cascas
Thread
ideal
ideal logic
inlet
logic
pressure
working
working pressure
......but 21mb at meter with a pipe run of 22mm for about 5m with 4 elbows and 0.5m of 15mm into boiler!! could this be a faulty gas valve rather than a pipe sizing issue? any thoughts lads?
don't think its a regulator problem as its 20mb at the meter when boiler is on.
Hi, I've recently moved into a new house with an LPG central heating system part of which feeds a Myson Kickspace 500 heater in the kitchen. The fan blows fine when you set it to cold but won't run when set on "heat". Having looked under the kitchen cabinets where the plumbing is and felt the...
Hello, i am GSR fiter, after some more advice. I fitted a gas fire today, the standing pressure at the meter is 18mbar, working pressure at meter is 18mbar. The inlet pressure at the fire is 17mbar.
Thats a 1 mbar drop so when the standing pressure is adjusted it should be ok? do i just get...
fireplace_man
Thread
advice
confused
gas
inlet
meter
pressure
pressures
sorted
Not that I did, but just thought I would mention it, after checking the inlet working pressure at the boiler hundereds of times without a fault, today I installed a boiler, inlet pressure 25mb, fire the boiler up and pressure drops to 14mb. So I check at the meter, 25mb standing, fire boiler up...
Hi
I've just replaced the ball float valve in my side entry toilet cistern but when I've reconnected it there is a leak where the tap connector meets the plastic thread. I'm not sure why. Could it be just that the connector isn't quite straight to the plastic thread of the float valve or does...
All,
Moved this weekend, connected up washing machine and no joy. It is not taking in water from the cold inlet. The valve is open but no water is flowing. We've tried a new hose but with the same problem.
Questions (I know nothing about plumbing as will become obvious):
(i) if the cold water...
Irish lad
Thread
after
further
inlet
machine
move
plumber
plumbing
problem
valve
washing
washing machine
water
I'mm looking at buying a worcester bosch Greenstar 12ri boiler, the technical docs for the boiler say it requires a 22mm gas supply pipe, however the existing supply is only 15mm, it must be stepped down somewhere between the meter & the boiler. Pulling up floors/kitchen etc is not an option so...
Hi all,
I have just purchased a new gas cooker and my plumber is asking me to let him know the type of fitting so he can get the hose on his way.....
Now, my old cooker looks simple, an inlet with threads to take a 1/2" hose.
This new one has the inlet, but with what looks to be...
I recently purchased a new towel rail but could not fit the two valves [Thermostatic and on/off] as the threads on the valve and radiator did not match up. The valves were purchased separately from the radiator but I did not see this as an issue. The on-line supplying company is sending a...
Our boiler plumbing started making a strange noise this evening. (Ideal Logic Combi)
Noise is like a vibration sort of noise, disappears as soon as the hot water tap is turned on. Remains if boiler is switched off. Heating on makes no difference to noise.
Noise disappears if I close DHW inlet...
before starting work on gas pipework is it ok to put blanking discs in the metre inlet&outlet or do you have to disconnect the metre and put caps on the inlet and outlet?? trying to go by the book here for learning purposes
sterry_12
Thread
blanking
inlet
meter
outlet
pipework
question
thats
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.