The system is based on an old Concord WRS boiler with a fairly simple time clock and some recently change radiators. The pump has been changed just twice and I think the time clock once. We have a thermostat in the hall and we can have water only or water and heating controlled by the on off...
sfbait
Thread
boiler
central
central heating system
fully
gas
heating system
not working
old
radiators
system
water
working
year
I'm having 2 Close Coupled Roper Rhodes fully enclosed back to wall toilets fitted. Waste pipe coming through floor not wall so finding it nearly impossible to connect as cant see what you are doing. The first toilet we cut a trap out of the floor so we could get up underneath it...once it was...
renovation2
Thread
back to wall
close
coupled
fully
help
oil
toilet
wall
Hey,
Never had to work with what I think may be an air lock before , heres the back story ;
Local village shop owner said a hot tap in shops upstairs bathroom was left on slightly over night (1 of 3 appliances fitted to a water heater) and from that morning on wards the 2 KITCHEN hot taps in...
Hi, thanks for taking a look at my post. I'm currently having a house built.The drain pipes for my house have been laid and the slab will be poured on Saturday. The sweeping 90 that joins the 4 inch waste pipe below ground doesn't seem to be fully seated. When I stick my hand in I can feel a 3...
Hi iam gas safe full acs and qualified wet plumbing looking for some one to work with company iam 35 yrs old and this is my 1st year in to plumbing and gas I don't want to work for my self I want to work for a business and grow within that business iam from Cheshire ch66 area I can work in...
lbrad02
Thread
acs
fully
gas
gas engineer
gas safe
gas safe register
gsr
looking
looking for work
plumbing
safe
wet
work
Hi all. Usual thing, existing floor standing gas boiler is pumped for CH and running into a 28mm cylinder coil for DHW.
I am planning on capping off the CH flow and return at the boiler and converting the system into a y-plan fully pumped system.
Question for all. I realise the pipework is...
Hi guys
i am going to be replacing a open vented cylinder from an airing cupboard with gravity hw circulation to an unvented cylinder in the loft with fully pumped heating and hot water,
i would like to know if the heating will circulate okay it the primary htg pipe work to the cylinder coil is...
Grandesporting
Thread
boiler
central heating system
cylinder
fully
loft
mexico
unvented
Hi first post here, and in desperate need for some advice thanks
Our toilet is a very old style system, its not one of those built all in ones it has a separate tank way above the toilet bowl.
Looks similar to this:
hxxp://st.houzz.com/simgs/526124c802174c0c_15-8512/modern-bathroom.jpg...
Hi everyone. First post so please go easy. I live in a 2 story 3 bed semi with ofch which consists of a grant boiler and riello burner in the garage. There are 3 pumps in the garage. One for downstairs heating, one for upstairs heating and one for the hot water cylinder that's in a cupboard in...
Have a customer who has a leaking cylinder and it's a Fortic indirect with 28mm connections to coil. Is there any way of getting a cylinder for this or will it have to be upgraded to fully pumped etc as regs?
So the radiator in the kitchen gets slightly warm, and the rad in the lounge doesnt get warm at all. Al other rads are fine.
I had a plumber round 2 days ago (to fit a new thermostat for the boiler), and he looked at them, took off the TRVs, and said they had sticky valves. We turned off all...
Hi,
I have the following in a gravity fed system:
Boiler: iCOS m3080
idealheating.com/downloads/manuals/155695.pdf
Location: Kitchen - ground floor
Timer: Siemens RWB9
w3.siemens.co.uk/buildingtechnologies/uk/en/building-automation/residential-controls/documentation/documents/rwb9_i.pdf...
Hi, after a bit of advice/what to expect before I call someone out and start spending money.
Have lived at my property for almost a year now and the water pressure/flow has never been great, I recently bought a water pressure gauge and screwed this on to my garden tap which is literally...
I have recently changed a old toilet ball valve(bottom entry) for a new bottom entry ball valve, the old ball valve was filling near the correct water level then slowing down and then trickling for about 10mins before shutting off. The costumer was having to remove the cistern lid and raise the...
i have a job that customer is complaining about sound coming from rads, its like a circulating sound, system is around 20 yrs old , but boiler is about 2 , (worcester combi gas) boiler enginner has changed the pump, sound still there, when you close th trvs right down the sound disappears, or...
Hi could any one give me a bit of advice please. I want to run a washing machine from an old toilet sink which was knocked down the pipe work cold is coming off the mains but very slow pressure coming through the pipe work from main kitchen sink is about 15ft would that be the problem or do...
If i complete Plumbing and Domestic Heating City & Guilds 6189 Diploma Level 2 will I then be classed as a fully qualified plumber or do you need to complete level 3 as well?
Hi, I have a large Megaflo that has decided not to heat up fully. My heating/water system has 4 paths (Underfloor heating ground floor / radiators upstairs / towel rails / hot water)
The feed to the hot water is at boiler temperature and I can feel this at the feed pipe at the bottom of the...
im516791
Thread
fully
heating
heatrae
megaflo
not heating
plumber
sadia
valve
water
Hello All
This might be a bone question but can I fit a new boiler & keep the gravity hot water system ? I'm sure I can't due to the regs & condensing oil boilers mostly have two outlets ( apart from the very high quality WB range, NOT! )but other plumbers have told my customer that it's ok. Am...
mick99
Thread
boiler
fully
gravity
hot
hot water
point
pumped
water
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.