Search the forum,

building regulations

Building regulations in the United Kingdom are statutory instruments or statutory regulations that seek to ensure that the policies set out in the relevant legislation are carried out. Building regulations approval is required for most building work in the UK. Building regulations that apply across England and Wales are set out in the Building Act 1984 while those that apply across Scotland are set out in the Building (Scotland) Act 2003. The Act in England and Wales permits detailed regulations to be made by the Secretary of State. The regulations made under the Act have been periodically updated, rewritten or consolidated, with the latest and current version being the Building Regulations 2010. The UK Government (at Westminster) is responsible for the relevant legislation and administration in England, the Welsh Government (at Cardiff) is the responsible body in Wales, the Scottish Government (at Edinburgh) is responsible for the issue in Scotland, and the Northern Ireland Executive (at Belfast) has responsibility within its jurisdiction. There are very similar (and technically very comparable) Building Regulations in the Republic of Ireland.

View More On Wikipedia.org
  1. A

    Urgent expert advice needed on a recently fitted gas pipe

    Hi all, firstly I am new to forums so apologies if I dont conform to appropriate ettitues and standards... not even sure if this thread is in the correct area?! Question: Is it safe to run a copper GAS pipe 22mm on an external wall??? Will it satisfy building regulations? The pipe is approx...
  2. A

    Brains Required 4 black smoking GERKROS NEW boiler AAAAAAAAAAAAAAAargh!

    Any Brainiacs out there that can help, we have saved for 7 years to buy central heating (old house, falling, down, very,very rural, 2 kids, 10 dogs, 2 part time jobs!!!) Two weeks ago we bought everything required from ramsbottom oil suppliers, they recommended this Gerkros boiler its the...
  3. A

    Maximum Height for Soil Branch to WC

    Hi All, Need some advice with regards to what has been installed in our new build. The main foul run enters the house through the floor in the downstairs WC. A branch connector comes off this to run to the WC in this bathroom with the run continuing up through the house as normal to a slate...
  4. B

    Part G, TMV and combis

    Just a quickie, Got a loft conversion, fitting an ensuite and bath. Part G states for hot water to bath must fit TMV, ok that fine, If DHW supplied from a combi boiler do the requirements still stand. I think its gonna be very rare that any combi can supply hot water to a bath at over 48oc...
  5. R

    Room Stat Not Fitted ?!

    hello i am renting a house and have noticed the combi boiler which has been fitted dose not have a working room stat on the wall to regulate the temperature in the house, the boiler itself does have 2 temperature controls on the front panel, one for the radiators and the other for the hot water...
  6. I

    new shower tray onto upstairs floorboards

    I am installing a new slimline plastic shower tray onto upstairs floor boards. Does the floor need re-enforcing under building regulations? or is the just for heavy resin trays?
  7. L

    Question for the experts!

    What fall should 100mm w/c waste pipe have per metre? Should the fall be increased to compensate for 3 - 90 degree bends? (The total length from the WC to the stack is about 3.5 metres) Thanks
  8. T

    Air testing soil stack

    Hi all, I'm thinking of renewing the old cast iron soil stack on our house when carrying out renovations in our bathroom (which involves moving the positions of the sanitaryware so it's quite extensive). I read that all new soil stack installations should be air tested using a 'U' gauge in...
  9. F

    Lockshield + wheelhead valves

    I am replacing a couple of radiators in large room where the room stat is located. I have two spare lockshields from previous work. Can I use lockshields in place of the wheelhead valves? Are they they both the same inside, just different tops ? Does a wheelhead valve open up more than a...
  10. L

    Height

    Hi Is there a standard height for fitting system controllers ? I had a disagreement today with an electricien who wanted to fit a solar controller 1.2m off the ground ? He ended up fitting at 1.6m. Thanks Lenny :)
  11. R

    New boiler and scrappage

    Hi there, I'm getting 3 quotes this week as I noticed the new scrappage scheme and thought I would see what the cost of change would be. We have a house that's 23 years old and so is the boiler although it has been serviced every year. I remember when we moved in and I fitted a new kitchen...
  12. A

    Urgent: BS for radiator height

    Hi, Does anyone know if there is a 'official' British Standard reference for the installation of radiators and a minimum height? Is the minimum of 150mm a British Standard or simply 'best practice'. If so, is there a web page I can print out? Cheers, Andrew
  13. W

    solar heating .

    thinking about doing training on solar heating . is there money to be made , plus is there much demand for it .
  14. A

    advice appreciated

    Hello all, I have an baxi bermuda 50/3 back boiler,which works fine,with no problems appart from a slight banging when heating goes off late at night. my questions are,as i qualify for the replacement boiler scheme, would it be benifical to replace with a new boiler or replace rads. At present...
  15. I

    Fine Tuning By Pass

    Wanting to be sure that the by pass on my S plan (2 heating zones and water) is balanced correctly. Recently had new boiler, now with over run on the pump. Old boiler didn't have this. All pipework the same as before. The by pass is 22mm pipe with gate valve. I am supposing that as long as...
  16. I

    CH Pipe Runs in Joists

    I just wanted to gain any best practice regarding copper and plastic pipe runs when Notching/drilling Holes in Joists. I am well aware of the Building Regulations when it comes to Notching/Drilling, but just wondering if there is anything else people do different i.e. do you prefer plastic and...
  17. C

    Moving a bolier from outside - more advice please!

    Hello, I have a small garden basement flat in a Victorian conversion (1 bedroom & 1 lounge/kitchen). Currently the boiler is outside, just outside the bedroom window. It needs to be replaced and I want to move it indoors. Could anyone give me a ballpark regarding the replacement, moving it...
  18. H

    Advice Needed on heating systems for victorian Semi

    I am the process of purchasing a 2 bedroom Victorian semi detached house to live in and would like some advice on a central heating system. Currently the heating appears to be provide by electric storage heaters, with an emmersion tank for hot water upstairs and the electrics are as pictures...
  19. M

    3 year old Warmflow U90 oil fired boiler - knackered already??

    Hi, Sorry, I'm not a plumber but am looking for some advice re my boiler - any help much appreciated! I have a 3 year old Warmflow U90 boiler with Riello RDB 2.2 burner. It was making strange metallic banging noises so I got the plumber who fitted it (OFTEC registered) to come out and look...
  20. N

    Conservatory radiator

    In the winter my conservatory/kids playroom gets very cold and requires a portable oil filled heater to warm it up before the kids can play in it - sometimes I forget to put the timer plug on so I get shouted at by the mrs!I have been thinking of getting a rad fitted to reduce the abuse, by...

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock