You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
board
Board International S.A. is a Business Intelligence (BI) and Corporate Performance Management (CPM) software vendor known for its Board toolkit. The company is headquartered in Chiasso, Switzerland, where it was founded in 1994, and Boston (MA).
While its core markets are still located in Europe, Board International has been expanding globally and now operates in 19 countries worldwide. It has a total of over 3,000 customers from a number of different industries,
Hello All
I've popped on just to see if anyone can help guide with costs and an invoice I've just received for works recently done. This wasn't quoted as the engineer in question has done some work for us before and this job, although not an emergency, was done in haste.
Telephone call...
Hi All,
i am looking at a Main 30 HE combi that is struggling to get going. It does after a few attempts fire up but as soon as it gets going and lights the burner the main rcd on the consumer unit trips. I am looking at changing the board. Has anyone had anything like this before and if so what...
Does this look right? Any advice before I add my Aqua plasterboard? I've checked there are no leaks for two days is that long enough to be sure? (Sorry...it's come out sideways)
Diygirl
Thread
board
diy
help
leaks
pipes
plumbing
should
soldering
I went to a job today of a lady complaining about the hot and cold water pressure.. She said every now and then both hot and cold stops completely then comes back on.
Naturally I think it's a gravity system and either a ballvalve issue or an air lock of some sort, or maybe a pump.
I get there...
Friends
Got to fit a radiator to a plaster board.
These have been recommended
Any thoughts?
http://pages.ebay.com/link/?nav=item.view&alt=web&id=301008593424&globalID=EBAY-GB
Tjx
Excuse the naivety, I have never worked on new builds.
The other week we had a job on a house that was roughly 2 years old to move an upstairs rad. I wanted to keep the job neat so tried to keep all pipe work under the floor. I cut the section of floor I wanted to lift, however, once I'd...
Evening all, I am currently quoting for a refurbishment of 10 apartments which are currently offices. Each flat will need its own metered water supply to feed a direct 160 litre unvented cylinder which feeds one bathroom in each apartment. The building currently has 2 x 25mm water mains...
I have the above which was fitted with a 13 amp fuse, which melted the diverter motor wire and blew the fuse on the pcb. Do they have a spare fuse on them or shall I just get a new pcb for it
Hi guys,
Got sent to a job yesterday, Ideal Mini C24 no CH or HW. Called technical who went through some tests.
Is the fan running? Yes
Check for 240 on air pressure switch. 240 ok
Is there any sparking at all. No I say
Check electrode leads for continuity. Continuity ok...
I have a Gledhill Boilermate OV a Class. Boiler switched off, gas board came out to check everything boiler started again. Since then Central heating is working fine but the hot water is not consistent. I get a small amount of water, enough for a very quick shower, not enough for a bath. If you...
Stewartk
Thread
again
board
boiler
boilermate
class
enough
gledhill
hot
hot water
no hot water
oil
water
What's the best fixing for plaster board, what's the strongest, easiest, versatile.
I like the the self drilling rawl ones. Don't even have to drill a hole lol
tommy1712
Thread
board
drilling
fixing
fixings
plaster
possible
timber
I got a customer wanting me to fit a column rad to a wall that's been "dot and dabbed" I am not overly happy because it's not like normal rad brackets that spread the load these are small brackets that use m10 bolts. There is only a 10mm gap to the solid wall behind and he seems to think I can...
Hello,
I need some advice on my DIY wet under floor system I installed in my new build house.
Basically I have fitted JS speedfit15mm pipe into 100mm insulation foam board by routering the pipe slot into the foam and then pressing the pipe into the foam slot at 200mm centres.
I then...
Hi,
Noticing that the heating wasn't working I've changed the diverter valve on my vaillant turbomax (installed 2006ish and only ever used for hot water... Until now)
The diverter valve can be set manually (frigged) to make the boiler deliver hot water or CH, but won't switch...
Just looking for a bit of advice on the Vokera Maxin24e. When the hot water was running for a while the boiler goes to lockout and needs reset before it will run again for another while. I had an ignition control board from one which I had taken out and stuck that in but the same thing has...
Evening All
Got my bathroom to do at home, and just wondering you thoughts on this.
Plasterboarded walls at the moment. Nought wrong with board, just looking at overboarding it with 6mm backer/aquaboard.
Goo idea or not?
Graham
Hi just signed up to the forum , been having some interesting reads already glad i joined. I posted a new thread on the solid fuel section but waiting in approval from moderator , hope it goes on soon and some of you guys can give me some advice on it . Cheers
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.