Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

aqualisa

No Wikipedia entry exists for this tag
  1. F

    Aquavalve 900 shower dripping

    Hi, I'm just a householder with a question. Hope someone can offer a suggestion re replacing a Aquavalve 900 cartridge, which is now discontinued. The shower dripping is getting worse as time goes on. Are there any other cartridges that can be fitted in place of the old one, Aqualisa or other...
  2. T

    Aqualisa Quartz Electric Shower

    Have repaired an internal leak on a Aqualisq Quartz electric shower, used a gasket sealant worked a treat, no more internal leak. Turned water and power back on, run the cold water to fill the shower reservoir. Now the shower head is dripping very slightly, have turned the power off and still...
  3. P

    Electric shower: Aqualisa, failure of ( no hot water)

    The high & low heat indicator lights not were working & no hot water was coming. I changed the micro-switch with no effect. Now both lights come on & still no hot water! Could it be simply the circuit board or is there some other failure you guys know of?
  4. W

    booster pump for shower question

    hi all i need to fit a booster pump for a new shower, however there is no room in the airing cupboard to fit one. customer said he wants one in the loft, i will fit a essex flange on the cylinder coming off with a loop to run into the loft to avoid airlocks . how would i know what pump he needs...
  5. M

    Digital showers - pumped

    Can anyone advise whether digital showers with an integral pump in the unit tht goes in the loft are any less/more noisy than a traditional pump?
  6. G

    Aqualisa Quartz A2 shower continuusly dripping - repair or replace ?

    Hello, My customer has a continuously dripping shower - Aqualisa Quartz A2 - gravity feed - and I am loath to try and dismantle it to try and strip and repair it given the unusual nature of its design and limited technical information that seems to be available. The black moulding that the hot...
  7. R

    Aqualisa shower cartrudge replacement

    I have just replaced the thermostatic cartridge in my shower - had to replace it as the original was leaking - job seamed straight forward - turned off hot water - turned off cold water - replaced cartridge - switched everything back on - plenty of hot water but no cold water -- checked both hot...
  8. H

    Aqualisa Aquarian Shower Mixer

    I need to replace my 10 years old Aqualisa Aquarian shower mixer. Since it is a push fit connection, can I just pull the shower mixer out by force? Would I damage the exposed pipes by doing so? Please help! Many Thanks
  9. M

    Aqualisa, Mira, or Triton?

    Hey guys, I am new to this forum but from the threads I have read you chaps seem like a helpful bunch. I have a few customers who want to replace their old showers with a known make (they quoted Aqualisa, Mira and Triton). I was wondering which make would do you recommend? Cheers, Mark
  10. R

    Sparky needs a hand!

    Hi chaps, just popped over from the Sparky forum - got a problem and need some quick advice! My own electric shower - cheap and cheerful Aqualisa 'Aquastyle' 10.5kW. Less than a year old and still under warranty. Problem is that it's just decided to spring a persistent leak from the pressure...
  11. S

    Triton T80

    Just to let you all know that today i fitted a TRITON T80 and it was a treat to install! The water inlet on unit can swing left to right and same goes for the electric's so next time a customer ask's for a half decent replacement recommend one of these bad boy's and it will save you altering...
  12. T

    Aqualisa shower problem

    Hi Just joined as I've a problem and wondered if anyone could offer some advice I have an Aqualisa Aquavalve 200 thermostatic shower which was originally installed in 1987. The thermostatic shower cartridge was changed over a year ago but the water pressure hasn't been very good since it was...
  13. R

    Aqualisa Ilux Issue with Date Cable

    HI I have had a small extension to my bathroom which meant the shower was moved a small distance from where it was located/ My builder when taking down the shower managed to break the data cable at the shower control end. I have managed to reinsert the cable which houses the 6 smaller cables...
  14. A

    Aqualisa 609 Shower leaking no screw thread!

    Hi I have an Aqualisa 609 valve shower which constantly drips. I think I need to change or at least remove the cartidge and chnage the 'O' ring. I have taken off the on/off plate at the front and there is a screw behind it. It looks like there is some damage to the screw thread as I cannot...
  15. R

    Aqualisa quarts standard processor

    Hi All does anyone know where i can get a cheap standard processor for above shower, i can only find it at aqualisa direct who want £240 + vat Thanks Matt
  16. D

    aqualisa quartz electric help

    Hey all,tried to fix a friends shower recently. It's the named shower above. It runs for about 30 seconds then it seems to click and turn itself off. The blue light on the front of the shower no longer lights up at all and it used too. Once it cuts out I can turn it straight back on and it...
  17. P

    Aqualisa Thermostatic Bar Valves

    Hi there, trying to help a mate out who has problems with his controls. Basically, whenever he turns the water off on the control unit, he has to push the control right in to stop the water flowing out of the unit. Spoken with Aqalisa, who say I need a new valve unit, which is fine. My...
  18. B

    Siamp toilet innards - which replacement?

    Hi to all you lovely plumbing chaps and ladies. My question The Siamp dual flushing skipper 45 is the current fitment. Someone else on these forums recommends to replace with a fluidmaster, but they did not say which one. I need the correct dual flushing one, so that I can buy an equivilant. OH...
  19. G

    aqualisa thermostatic cartridge

    My aqualisa shower started to drip so i replaced the cartridge and o ring and the drip has stopped now but the cold water flow is very poor. The shower is tank fed and there is no blockage in the tank is it possible there is an air lock in the pipework and if so whats the best way of removing it
  20. T

    Shower problems! 65mm between hot & cold feeds

    Hi all, Generally I'm used to shower feeds being 150mm apart center to center but I've just been to look at one where they're only 65mm apart. The cold (mains fed) is fine but the hot (cylinder fed) won't turn off when the shower is stopped. Have any of you heard of this before and can anyone...
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock